Guaranteed Success in CCNP Data Center 350-601 Exam Dumps
Cisco 350-601 Daily Practice Exam New 2026 Updated 423 Questions
Cisco 350-601 exam is an essential certification for network professionals who want to advance their careers in the field of data center management. Implementing Cisco Data Center Core Technologies (350-601 DCCOR) certification validates the candidate's knowledge and skills in implementing core data center technologies and provides a competitive edge in the job market. With the increasing demand for skilled data center professionals, obtaining the Cisco 350-601 certification can open up new opportunities for career growth and development.
NEW QUESTION # 56
Refer to the exhibit.
Which statement describes the default gateway configuration of the vPC?
- A. N7K-2 acts as the default gateway for all traffic.
- B. Either switch can act as the active default gateway.
- C. N7K-1 acts as the default gateway for all traffic.
- D. N7K-2 forwards traffic that is destined for the default gateway by using the peer link.
Answer: B
Explanation:
https://community.cisco.com/t5/networking-documents/peer-gateway-feature-on-the-nexus-7000/ta-p/3113290
NEW QUESTION # 57
An engineer is seeking the most optimal on demand CPU performance while configuring the BIOS settings of UCS C-series rack mount server.
- A. C6 Retention
- B. C6 non-Retention
- C. C0/C1 state
- D. C2 state
Answer: C
NEW QUESTION # 58
Which virtual MAC address is the default for HSRP version 2 group 10?
- A. 3716.1350.1C0A
- B. 0000.5E00.0110
- C. 0000.0C9F.F010
- D. 0000.0C9F.F00A
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-hsrp-v2.html
NEW QUESTION # 59
An environment consists of a Cisco MDS 9000 Series Switch that uses port channels. An engineer must ensure that frames between the source and the destination follow the same links for a specific flow. Subsequent flows are allowed to use a different link Which load balancing method should be used to accomplish this goal?
- A. src-dst-oui
- B. src-dst-port
- C. src-id/dst-id/oxid
- D. src-id/dst-id
Answer: D
Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_3/san- os/configuration/guide/PortChnl.pdf
NEW QUESTION # 60
Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?
- A. Open Agent Container
- B. NX-API
- C. LLDP
- D. Bash shell
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/programmability/guide/ cisco_nexus7000_programmability_guide_8x/b-cisco-nexus7000-programmability-guide-
8x_chapter_011.html
NEW QUESTION # 61
Refer to the exhibit. Which Cisco MDS 9700 Series Switch module EPLDs are upgraded?
- A. standby supervisor
- B. fan
- C. fabric
- D. PSU
Answer: A
Explanation:
The correct answer is C. standby supervisor.
From the exhibit, the command output clearly shows:
Module 6 SUP Yes disruptive Module Upgradable and later confirms:
Module 6 EPLD upgrade is successful and 6 SUP Success.
This indicates that the EPLD upgrade was performed on a Supervisor (SUP) module, specifically module 6. In Cisco MDS 9700 architecture, supervisor modules operate in a redundant pair (active and standby). When EPLD upgrades are performed, Cisco best practice and system behavior typically upgrade the standby supervisor first, because it allows the system to maintain control-plane continuity and minimizes disruption.
The output does not mention PSU, fan, or fabric modules, eliminating options A, B, and D. The explicit reference to SUP confirms that the upgrade applies to a supervisor module.
Thus, based on the module type shown in the output and standard Cisco upgrade behavior, the EPLD upgrade is applied to the standby supervisor, making C the correct answer.
NEW QUESTION # 62
Which service profile is affected if the default host firmware policy in Cisco UCS Manager is changed?
- A. any service profile that has no host firmware policy defined
- B. any service profile that uses a user-created host firmware policy
- C. any service profile that is not in the root sub-org
- D. any service profile that uses the global-default host firmware policy
Answer: A
NEW QUESTION # 63
An engineer must perform an initial configuration of VXLAN Tunnel End-Point functionality on the Cisco Nexus 9000 Series platform All the necessary features are already enabled on the switch Which configuration set must be used to accomplish this goal?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: C
NEW QUESTION # 64
A SAN administrator receives reports about latency and response-time issues that impact various applications.
The incidents have gradually increased in frequency and seventy and have reached a critical state Which DCNM configuration set identifies the source of the issues?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 65
A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?
- A. Modify the privilege level assigned to the user
- B. Define a custom user role and assign it to users
- C. Assign the user "Employee1" the network-operator role
- D. Assign users to a specific Cisco UCS locale
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_role-based_access_control_conflguration.html#d18994e1993a1635 User Locales You can assign a user to one or more locales. Each locale defines one or more organizations (domains) to which a user can access. Access is usually limited to the organizations specified in the locale.
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/4-1/b_Cisco_UCS_Admin_Mgmt_Guide_4-1/m_rolebased_ access_control_conflguration.html#d18994e1993a1635
NEW QUESTION # 66 
Refer to the exhibit. All switches are configured with the default OSPF priority. Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area?
- A. SW2# configure terminal
SW2 (config)# router ospf 1
SW2 (config-router)# router-id 10.10.10.22 - B. SW2# configure terminal
SW2 (config)# interface ethernet 1/1
SW2 (config-if)# ip ospf priority 1 - C. SW2# configure terminal
SW2 (config)# interface ethernet 1/1
SW2 (config-if)# ip ospf priority 255 - D. SW2# configure terminal
SW2 (config)# interface ethernet 1/1
SW2 (config-if)# ip ospf priority 0
Answer: C
Explanation:
Section: Network
Explanation/Reference:
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/nxos/commands/ospf/ip-ospf-priority.html
NEW QUESTION # 67
What is a characteristic of the install all command on the cisco Nexus series switch?
- A. Impact data plan traffic
- B. Automatically checks the image integrity
- C. Upgrades only certain modules
- D. Continues the upgrade process if any step in the sequence fails
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/ b_Cisco_Nexus_9000_Series_NXOS_ Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/b_Cisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.html
NEW QUESTION # 68
Refer to Exhibit:
An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/programmability/guide/ b_Cisco_Nexus_9000_Series_NX-OS_Programmability_Guide_7x/Python_API.html
https://www.ciscolive.com/c/dam/r/ciscolive/apjc/docs/2016/pdf/DEVNET-1077.pdf
NEW QUESTION # 69
Refer to the exhibit. A software downgrade must be performed on a Cisco Nexus 9000 Series switch. What is displayed by running the command shown?
- A. that the bootflash file is incompatible with the switch software
- B. features that are removed automatically from the switch
- C. impact of an in-service software upgrade and chassis reload
- D. that the bootflash file is incompatible with the switch hardware
Answer: B
NEW QUESTION # 70
A SAN administrator receives reports about latency and response-time issues that impact various applications.
The incidents have gradually increased in frequency and seventy and have reached a critical state Which DCNM configuration set identifies the source of the issues?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 71
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
NEW QUESTION # 72
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal. Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device claim code
- B. device ID
- C. device serial number
- D. device public IP address
- E. device FQDN
Answer: A,B
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight/ b_HyperFlex_Installation_Guide_for_Intersight_chapter_011.html
https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-dataplatform/
214268-cisco-intersight-hyperflex-installatio.html
NEW QUESTION # 73
A service profile in Cisco UCS Manager must be configured with these requirements:
* Cisco UCS Manager must identify the interfaces on the VMware ESXi host that connect to the Cisco ACI fabric switches.
* The vNIC must support traffic management when congestion occurs.
Which two policies meet these requirements? (Choose two.)
- A. Network Control
- B. vNIC/vHBA Placement
- C. LAN Connectivity
- D. Serial Over LAN
- E. QoS
Answer: B,C
NEW QUESTION # 74 
Refer to the exhibit. A network engineer must retrieve the network interface name from a JSON object. The engineer loads the JSON into a Python dictionary named json_object. Which code snippet completes the Python script?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 75
A network engineer must configure a Fibre Channel interface on the Cisco MDS 9000 Series Switch. The configuration must meet these requirements:
Which command set configures a Fibre Channel interface that meets these requirements?
- A. Option C
- B. Option A
- C. Option D
- D. Option B
Answer: B
NEW QUESTION # 76
An engineer wants to create a backup of Cisco UCS Manager for disaster recovery purposes. What are two characteristics of a full state backup of a Cisco UCS Manager database? (Choose two.)
- A. contains all of the runtime states and statuses but not the configurations
- B. performs a complete binary dump of the database as a .txz file
- C. contains all of the configurations
- D. performs a complete binary dump of the databases as a sql file
- E. performs a complete binary dump of the database as a bin file
Answer: B,C
Explanation:
File: compressed file in .tar.gz format
https://www.virtual-odyssey.com/2019/10/31/its-the-little-stuff-cisco-ucs-backups/ the file extension for bin in a cisco context is usually the OS.
tar files are used for backup.
https://peazip.github.io/tar-file-format.html
NEW QUESTION # 77
What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)
- A. It ensures that network performance meets an SLA.
- B. It predicts the impact of changes to the network.
- C. It validates that devices comply with network security policies.
- D. It verifies the speed of network packet flows by using telemetry.
- E. It predicts the network load on a data center.
Answer: B,C
Explanation:
- Predict the impact of network changes
- Verify network-wide behavior
- Ensure network security policy and compliance
https://www.cisco.com/c/en/us/products/collateral/data-center-analytics/network-assurance-engine/at-a-glance-c45-740230.html
NEW QUESTION # 78
An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again. Which action be taken to meet these requirements?
- A. Increase Cos to 6.
- B. Disable VNTAG mode.
- C. Enable Uplink failover.
- D. Set default VLAN on the adapters.
Answer: C
Explanation:
Enable Uplink Failover check box - Check this box if traffic on this vNIC should fail over to the secondary interface if there are communication problems. VNTAG mode is required for this option.
Failback timeout field - After a vNIC has started using its secondary interface, this setting controls how long the primary interface must be available before the system resumes using the primary interface for the vNIC. Enter a number of seconds between 0 and 600. VNTAG mode is required for this option.
https://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/gui/config/guide/1.5/b_Cisco_UCS_C-series_GUI_Configuration_Guide.151_chapter_01001.html
NEW QUESTION # 79
......
Career Path
You can take the Cisco 350-601 exam to qualify for as many as three certificates as mentioned above. So, the next path will depend on your goals. If you are at the intermediate level, the best certificate to opt for is Cisco CCNP Data Center. But if you take this exam to attain the CCIE Data Center accreditation, you may want to seek a new challenge by focusing on a completely different path since it has a lab exam.
Test Engine to Practice 350-601 Test Questions: https://www.test4engine.com/350-601_exam-latest-braindumps.html
Use Valid 350-601 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=169CDWbIJvf7jAFpZ69puYb50yg6DQlm4