2022 Updated Verified C_IBP_2208 Downloadable Printable Exam Dumps
The Ultimate SAP C_IBP_2208 Dumps PDF Review
NEW QUESTION 36
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Aggregated constraints
- B. Minimum lot size
- C. Adjusted transport receipts
- D. Maximum lot size
- E. Transportation lead times
Answer: C,D,E
NEW QUESTION 37
You are setting up planing with lot sizes.What are some of the properties of lot sizes that you need to be aware of?Note: There are 2 correct answers to this question.
- A. Periodic lot size setting overrides the minimum lot size.
- B. Lot sizes are applicable for production and handling quantities.
- C. Lot sizes are time-independent master data settings.
- D. Lot sizes are applicable for production and transportation quantities.
Answer: B,C
NEW QUESTION 38
Which of the following are inputs to Demand Sensing with Gradient Boosting (Full) algorithm?Note: There are 2 correct answers to this question.
- A. Sales Order Quantities (both historical and future open orders)
- B. Recommended Safety Stocks from Multistage Inventory Optimization
- C. Forecast Error CV Calculated by Manage Forecast Error Calculations app
- D. Future Consensus Forecasts and Lagged Forecast Snapshots
Answer: B,D
NEW QUESTION 39
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Adjusted production interactive values
- B. Incremental production values
- C. Production source validity at the start of seasonal peak
- D. Capacity expansion with additional costs
Answer: D
NEW QUESTION 40
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Merge analytics and alerts into a new planning area from any sample planning area.
- B. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- C. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- D. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
Answer: C
NEW QUESTION 41
Which of the following are valid use cases for using the Realignment App?Note: There are 2 correct answers to this question.
- A. Removing outliers from the sales history of a reference product before transferring its sales to a new product
- B. Merging two locations into a new location
- C. Changing customer sources and reassigning customers to new DCs
- D. Using the realignment run to identify obsolete data
Answer: B,C
NEW QUESTION 42
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Link two analytics charts.
- B. Add process templates.
- C. Use drill-down functionality.
- D. Display all assigned analytics on a single UI.
- E. Rename the charts.
Answer: B,C,D
NEW QUESTION 43
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Leveraging the functionality of SAP Workzone
- B. Using Microsoft Excel planning views
- C. Leveraging the web-based planning capability
- D. Using Driver-Based planning
Answer: B,C
NEW QUESTION 44
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. This application job can be run for multiple time profiles at once.
- B. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
- C. The assigned Planning Area must be active.
- D. A time profile has to be activated so that the application job can proceed.
Answer: B
NEW QUESTION 45
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Complex calculation graphs for key figures
- B. Number of analytics charts displaying key figures' values
- C. Excessive SAP IBP formatting in the Microsoft Excel UI
- D. Number of local members and complexity of calculations
Answer: A,C
NEW QUESTION 46
Which type of Master Data will be represented by the Master Data Type LOCATIONFR?
- A. External Master Data Type
- B. Virtual Master Data Type
- C. Reference Master Data Type
- D. Compound Master Data Type
Answer: C
NEW QUESTION 47
What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.
- A. By Number of Items (Sorted Average)
- B. By Pareto Principle (Sorted and Cumulated %)
- C. By Pareto Principle (Sorted and Calculated Values)
- D. By Number of Items (Sorted Values)
Answer: C,D
NEW QUESTION 48
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Split into multiple planning areas to support weekly vs. daily planning needs.
- B. Keep the number of fairshare segments small.
- C. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- D. Increase the use of incremental lot size beyond the frozen horizon.
- E. Avoid using telescopic time buckets.
Answer: A,C,E
NEW QUESTION 49
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID4" ="$$PERIODID4CU$$...)
- B. IF("PERIODID5" ="$$PERIODID5CU$$...)
- C. IF("PERIODID3" ="$$PERIODID3CU$$...)
- D. IF("PERIODID2" ="$$PERIODID2CU$$...)
Answer: A
NEW QUESTION 50
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using a local member
- B. Using a key figure calculation
- C. Using a attribute as a key figure
- D. Using a appropriate period weight factor
Answer: D
NEW QUESTION 51
You are starting a new implementation project for SAP IBP and are considering the possible system architecture.What are the possible approaches for setting up the system landscape?Note: There are 2 correct answers to this question.
- A. Set up a two-tier landscape, and have the configuration of the development system regularly updated from the production system.
- B. Set up a three-tier landscape using transport, starting from the development system to test and production.
- C. Create additional planning areas in the test system to support training needs.
- D. Create additional test planning areas in the production system to support cutover needs.
Answer: A,B
NEW QUESTION 52
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.
- A. It checks whether the required planning level master data exists for a subset of input key figures.
- B. It checks whether the sourcing in the Production Source Item Master Data type exists.
- C. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- D. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
Answer: A,D,E
NEW QUESTION 53
You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Analytics provide the user with the option to select the target unit of measure.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Conversion to the target unit of measure is handled by SAP IBP Excel UI
- E. Units of measure are usually not time-independent.
Answer: A,B,C
NEW QUESTION 54
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Activate Local Member Recognition setting is selected.
- B. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
- C. Users should have authorization for template administration.
- D. Use Excel Cell References in the Report Editor option is selected.
Answer: A,C
NEW QUESTION 55
For which of the following application jobs can you enter planning filters as parameters?Note: There are 2 correct answers to this question.
- A. Purge Key Figure Data
- B. Purge Master Data
- C. Purge Non-Conforming Data
- D. Create Time Periods for Time Profiles
Answer: A,B
NEW QUESTION 56
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used to break down a large calculation into manageable subcalculations
- B. Used by end-users in planning views to help visualize cross-period calculations
- C. Used when you have more than three inputs at different planning levels in one calculation
- D. Used at any level of calculation level except the Request Level
Answer: A,C
NEW QUESTION 57
You need to use your resource cost effectively with a certain minimum use, even if it means producing more than demand.Which solutions would apply to this scenario?Note: There are 2 correct answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum use by incorporating violation costs.
- B. Excess stock can be generated and will need to be staged in an overflow warehouse.
- C. Capacity leveling will be possible for production and storage resources.
- D. Minimum capacity utilization will result in pull production occurring.
Answer: A,B
NEW QUESTION 58
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.
- A. The key figure is stored and system editable.
- B. The key figure is stored and all editable.
- C. The key figure is calculated and system editable.
- D. The key figure is calculated and all editable.
Answer: B
NEW QUESTION 59
......
Achive your Success with Latest C_IBP_2208 Exam: https://www.test4engine.com/C_IBP_2208_exam-latest-braindumps.html
Achieve The Utmost Performance In C_IBP_2208 Exam Pass Guaranteed: https://drive.google.com/open?id=1iQ-FvdTj66uUV2HXeYldi63lUw2cLlu3