83 Q&As in UPDATED NCP-CI-Azure Exam Questions Certification Test Engine to PDF
Get The Important Preparation Guide With NCP-CI-Azure Dumps
NEW QUESTION # 28
An administrator just completed the initial account setup tasks for NC2 on Azure, such as creating a My Nutanix account, starting a 30-day free trial for NC2 on Azure, and setting up the Azure account and subscription.
Which two additional actions should the administrator take before creating a cluster? (Choose two.)
- A. Allowlisting the Azure Subscription
- B. Creating an App Registration
- C. Configure VPN for connectivity
- D. Purchasing an Azure savings plan
Answer: A,B
Explanation:
Allowlisting the Azure Subscription: This step ensures that the Azure subscription is recognized and permitted by Nutanix Cloud Clusters (NC2). Without allowlisting, the necessary resources and permissions within the Azure subscription may not be available for NC2, potentially blocking the creation and management of clusters.
Creating an App Registration: This involves setting up an application within Azure Active Directory (AAD) to enable secure communication between NC2 and Azure. The app registration process includes assigning permissions and obtaining necessary authentication credentials, facilitating the interaction and management of Azure resources by NC2.
Reference:
Nutanix Documentation on NC2 Setup
Azure Active Directory Application Registration Guide
NEW QUESTION # 29
An administrator is deploying an NC2 cluster in Azure and observes on NC2 console that nodes will not progress and continue in a Booting state.
What is the most likely cause for the node not continuing to deploy?
- A. A private DNS server is being used that is not reachable.
- B. The subscription has not been validated to be allowlisted by Microsoft.
- C. The Azure account does not have an active subscription.
- D. An Azure Support case must first be submitted for allowlisting the Azure subscription.
Answer: B
Explanation:
Azure Subscription Validation: When deploying an NC2 cluster, the Azure subscription must be validated and allowlisted by Microsoft. This is a crucial step to ensure that the necessary permissions and configurations are set up for the deployment.
Booting State Issue: If the nodes are stuck in the Booting state, it often indicates that the subscription has not been properly validated and allowlisted. This prevents the deployment from progressing as required resources and permissions are not fully accessible.
Checking Allowlisting Status: Administrators should verify that their subscription has been allowlisted by contacting Azure support or checking the status through the Azure portal.
Resolution: Once the subscription is validated and allowlisted by Microsoft, the deployment should proceed without the nodes getting stuck in the Booting state.
Reference:
Nutanix NC2 on Azure Documentation
Azure Subscription Management
NEW QUESTION # 30
An administrator must ensure that certain NC2 VMs can access Azure resources. The NC2 VM traffic must not traverse the internet.
How would the administrator achieve this?
- A. By creating an Azure Private Endpoint for VMs in the host-mgmt subnet.
- B. By creating an Azure Private Endpoint for VMs in a Delegated Subnet
- C. By creating an Azure Private Endpoint for VMs in a No-NAT network via vWAN.
- D. By creating an Azure Private Endpoint for VMs in a NAT network via vWAN.
Answer: B
Explanation:
* Azure Private Endpoint:A Private Endpoint provides secure connectivity to Azure resources by enabling private access through the Azure backbone network. This ensures that the traffic does not traverse the internet, providing enhanced security and performance.
* Delegated Subnet:By creating an Azure Private Endpoint for VMs in a delegated subnet, the administrator ensures that the VMs can access Azure resources directly and securely without using the public internet.
References:
* Azure Private Endpoint Documentation
* Nutanix NC2 Networking Configuration Guide
NEW QUESTION # 31
An administrator is seeking help with an ongoing NC2 issue. After reaching out to Nutanix support, the administrator is introduce to the NC2 specialist who can help troubleshoot the problem.
How can the administrator verify that the NC2 specialist has access to the necessary organizations?
- A. Add the specialist as an admin user to the organizations.
- B. Ensure the specialist is assigned the RBAC role with proper permissions.
- C. Provide the specialist with the administrator's login credentials.
- D. Confirm the Support Authorization on the organization is set to Full Access.
Answer: D
Explanation:
To verify that the NC2 specialist has access to the necessary organizations for troubleshooting the issue, the administrator should:
* Confirm that theSupport Authorizationon the organization is set toFull Access. This ensures that the NC2 specialist has the required permissions to access the necessary resources and perform the necessary actions to resolve the issue.
Providing login credentials or adding the specialist as an admin user is not recommended due to security and privacy concerns. Ensuring the specialist is assigned the correct RBAC role is another valid approach but confirming the support authorization directly ensures they have the needed access.
References
* Nutanix Support and Services
NEW QUESTION # 32
An administrator is tasked to identify the firewall requirement and submit the port request to the requirement team before the clusters deployment.
Which requirement should the administrator ensure is implement on the corporate firewall?
- A. ICMP can disable but the connectivity should be enabled between the CVMs. Prism Element, and Prism Central.
- B. ICMP and connectivity can be disabled between the CVMs, Prism Element, and Prism Central
- C. Allow uni-directional internet Control Message Protocol (ICMP) traffic between the CVMs, femenr and Prism Central.
- D. Allow bi-directional Internet Control Message Protocol (ICMP) traffic between the CVMs, Prism Element, and Prism Central.
Answer: D
Explanation:
ICMP Traffic: ICMP is essential for network diagnostics and troubleshooting, such as ping and traceroute, which help in monitoring the connectivity and health of the network.
Bi-Directional Traffic: Allowing bi-directional ICMP traffic ensures that all nodes (CVMs, Prism Element, and Prism Central) can both send and receive diagnostic messages, which is crucial for maintaining proper communication and network stability.
Reference:
Nutanix Networking and Connectivity Requirements
Corporate Firewall Configuration Guidelines
NEW QUESTION # 33
An administrator is trying to determine which type of DNS server to deploy for a networking infrastructure in Azure.
Which DNS server option would require either VPN or ExpressRoute connectivity?
- A. On-premises
- B. Google
- C. Cloudflare
- D. Azure
Answer: A
Explanation:
DNS Server Options:
Cloudflare: A public DNS service that operates over the internet.
Azure: Azure DNS operates within the Azure cloud and does not require VPN or ExpressRoute for connectivity within Azure.
On-premises: Requires a secure connection, such as VPN or ExpressRoute, to be accessible from Azure, as it resides outside the Azure cloud.
Google: Another public DNS service accessible over the internet.
Connectivity Requirements:
On-premises DNS: To integrate on-premises DNS with Azure, secure connectivity (VPN or ExpressRoute) is necessary to ensure seamless and secure communication between the on-premises infrastructure and Azure resources.
Conclusion: An on-premises DNS server would require VPN or ExpressRoute connectivity to be accessible and integrated with the Azure environment.
Reference:
Azure DNS Overview
VPN Gateway Configuration
ExpressRoute Overview
NEW QUESTION # 34
A new subnet needs to be created within Flow Virtual Networking to accommodate a new type of workload in the company's NC2 Azure instance.
Which type of network will satisfy this task?
- A. VPC
- B. Underlay
- C. VNET
- D. Overlay
Answer: D
Explanation:
* Flow Virtual Networking: Nutanix Flow Virtual Networking allows for the creation of overlay networks to segment and manage network traffic.
* Network Types:
* Underlay: Refers to the physical network infrastructure.
* Overlay: Logical network built on top of the physical infrastructure, providing flexibility for creating isolated subnets and accommodating different workloads.
* VPC: Virtual Private Cloud, a network within a public cloud provider.
* VNET: Azure-specific virtual network.
* Requirement: Creating a subnet for new workloads within Flow Virtual Networking suggests using an overlay network for logical separation and management.
* Conclusion: An overlay network within Flow Virtual Networking will satisfy the task of accommodating a new type of workload in the NC2 Azure instance.
References:
* Nutanix Flow Networking Guide
* Azure Virtual Network Documentation
NEW QUESTION # 35
An administrator is tasked with allowing inbound connectivity for a user VM that resides on a NAT network. The ...... communicating successfully with other VMs in the NAT network.
The cluster has the following characteristics
A Transit VPC exists
* A User VPC exists
* A NAT subnet has been created
* 25 floating IP addresses are in use by other VMs
* Routes have been configured
When the administrator attempts to assign a floating IP address to the VM, none are available.
What is the reason for this?
- A. An additional Flow Gateway instance is required.
- B. An external DHCP server needs to be deployed into the cluster.
- C. Geneve encapsulation only supports 25 Floating IP addresses.
- D. Additional floating IP addresses need to be requested.
Answer: D
Explanation:
Floating IP Address Limitation: The cluster already has 25 floating IP addresses in use by other VMs. If the administrator cannot assign a floating IP address to the new VM, it is because the pool of available floating IPs is exhausted.
Requesting Additional Floating IPs: To resolve this issue, the administrator needs to request additional floating IP addresses to be allocated to the NAT subnet. This will ensure that there are enough IP addresses available for all VMs requiring inbound connectivity.
Reference:
Nutanix Networking Configuration Guide
Azure IP Address Management Documentation
NEW QUESTION # 36
An administrator is tasked with providing User VMs in Azure that are hosted within a Flow NAT network outbound internet connectivity.
In which order would the traffic flow through each component?
- A. User VM >Floating IP Address > Flow Gateway > Azure LB
- B. User VM >Flow Gateway > Floating IP Address > Azure NAT GW
- C. User VM > Delegated Subnet > Flow Gateway > Floating IP Address > Azure LB
- D. User VM > Delegated Subnet > Flow Gateway > Floating IP Address > Azure NAT GW
Answer: D
Explanation:
* User VM:The initial source of the traffic within the Azure environment.
* Delegated Subnet:Traffic from the User VM flows through the delegated subnet, which is configured to handle specific network traffic.
* Flow Gateway:The Flow Gateway manages and routes the traffic from the delegated subnet, providing network services and connectivity.
* Floating IP Address:The Flow Gateway assigns a floating IP address for the outbound traffic, facilitating NAT operations.
* Azure NAT Gateway:The traffic is then routed through the Azure NAT Gateway, which provides outbound internet connectivity for the User VMs, ensuring secure and efficient routing.
References:
* Azure Virtual Network NAT Documentation
* Nutanix NC2 Configuration Guide
NEW QUESTION # 37
An organization wants to use a Jump Host to access Prism Element and Prism Central within an NC2 cluster on Azure.
Which statement is true?
- A. Jump Host must not be used. Only VPN or ExpressRoute should be use.
- B. Jump Host instance can be deployed in the Prism Central VNet or an external VNet.
- C. Jump Host instance must be deployed in the cluster VNet.
- D. Jump Host instance can only be deployed in the Prism Central VNet.
Answer: B
Explanation:
Jump Host Deployment: A Jump Host is a secure server used to access other systems in a network. In the context of an NC2 cluster on Azure, it serves as an intermediary for accessing Prism Element and Prism Central.
Flexible Deployment Options: The Jump Host can be deployed in either the Prism Central VNet or an external VNet, providing flexibility in network design and access strategies. This allows the organization to choose the most suitable network for deploying the Jump Host based on their security and connectivity requirements.
Reference:
Nutanix NC2 on Azure Deployment Guide
Azure Virtual Network Configuration Documentation
NEW QUESTION # 38
When selecting the NC2 subscription plan from the Nutanix billing portal, which options are available?
- A. Pay-as-you-Go (payG), Bring your own License (BYOL)
- B. Reserved instances, Cloud Provider Credits, Bring your own License (BYOL)
- C. Pay-as-you-Go (PayG), Cloud Provider Credits, Bring you own License (BYOL)
- D. Reserved instances, Bring your own License (BYOL)
Answer: A
Explanation:
When selecting the NC2 subscription plan from the Nutanix billing portal, the available options are:
* Pay-as-you-Go (PayG):Allows you to pay for the services as you use them, providing flexibility and avoiding upfront costs.
* Bring your own License (BYOL):Enables you to use your existing Nutanix licenses within the cloud environment, offering cost savings if you already have licenses.
These options provide flexibility in how you can manage and pay for your Nutanix cloud clusters.References
* Nutanix Cloud Clusters Pricing and Plans
NEW QUESTION # 39
An organization want to use existing Azure resources to deploy NC2.
What is a valid requirement to use existing Azure resources for this task?
- A. Azure NAT gateway must be attached to the cluster management Prism Central, and external Flow Gateway subnets.
- B. A new Azure resource group must be created where all resources, such as VNets must be created.
- C. More than two DNS servers must be used.
- D. The fastpathenabled tag must be added after creating a NAT gateway.
Answer: B
Explanation:
* Resource Group Requirement:When deploying NC2 on Azure, it is essential to organize resources such as VNets, subnets, and other components in a dedicated resource group. This helps in managing and maintaining the resources efficiently.
* New Resource Group:Creating a new Azure resource group ensures that all the necessary NC2 resources are isolated and managed together, avoiding conflicts with existing resources and providing a clear separation for administration and billing purposes.
References:
* Azure Resource Group Documentation
* Nutanix NC2 Deployment Guide
NEW QUESTION # 40
After creating a new Nutanix User VPC, what is needed to allow traffic to flow out of the Flow gateway VM when using the NATed Path?
- A. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- B. Add a default route on the Transit VPC of 0.0.0.0/0 to the Flow Gateway.
- C. Edit the Internal Flow Gateway Security Group on the internal NIC to allow outbound taffic
- D. Add a default route on the Nutanix User VPC of 0.0.0.0/0 to the External Overlay network.
- E. Edit the External Flow Gateway Security Group on the External NIC to allow outbound traffic.
Answer: D
NEW QUESTION # 41
Which wen interface should be used to most efficiently terminate a Nutanix cloud cluster?
- A. Prism Central Console
- B. AWS Console
- C. Prism Element Console
- D. NC2 Console
Answer: D
Explanation:
To efficiently terminate a Nutanix cloud cluster, the NC2 (Nutanix Cloud Clusters) Console should be used.
The NC2 Console provides the necessary tools and interface specifically designed for managing and terminating Nutanix clusters within cloud environments, ensuring a seamless and efficient process.References
* Nutanix Cloud Clusters Documentation
NEW QUESTION # 42
An administrator is tasked with configuring connectivity between an on-premises datacenter and Azure.
Which two connectivity options are supported? (Choose two.)
- A. Leased Line
- B. VPN
- C. ExpressRoute
- D. Direct Connect
Answer: B,C
Explanation:
For configuring connectivity between an on-premises datacenter and Azure, the two supported options are:
VPN (Virtual Private Network): Site-to-Site VPN allows you to create a secure connection from your on-premises network to Azure over the public internet using IPsec/IKE protocols.
ExpressRoute: Provides a private connection between your on-premises infrastructure and Azure, ensuring traffic does not traverse the public internet.
Both options provide secure and reliable connectivity, with ExpressRoute offering enhanced performance and security due to its private connection. Reference Azure VPN Gateway Azure ExpressRoute Overview
NEW QUESTION # 43
When selecting the NC2 subscription plan from the Nutanix billing portal, which options are available?
- A. Pay-as-you-Go (payG), Bring your own License (BYOL)
- B. Reserved instances, Cloud Provider Credits, Bring your own License (BYOL)
- C. Pay-as-you-Go (PayG), Cloud Provider Credits, Bring you own License (BYOL)
- D. Reserved instances, Bring your own License (BYOL)
Answer: A
Explanation:
When selecting the NC2 subscription plan from the Nutanix billing portal, the available options are:
Pay-as-you-Go (PayG): Allows you to pay for the services as you use them, providing flexibility and avoiding upfront costs.
Bring your own License (BYOL): Enables you to use your existing Nutanix licenses within the cloud environment, offering cost savings if you already have licenses.
These options provide flexibility in how you can manage and pay for your Nutanix cloud clusters. Reference Nutanix Cloud Clusters Pricing and Plans
NEW QUESTION # 44
An administrator has been asked to create a cluster to support new workloads.
What are the maximum number of nodes supported in an NC2 on Azure environment?
- A. 14 nodes
- B. 18 nodes
- C. 28 nodes
- D. 24 nodes
Answer: B
Explanation:
* NC2 Cluster Node Limit: NC2 on Azure has specific limitations regarding the maximum number of nodes supported in a single cluster.
* Maximum Nodes: According to the current NC2 on Azure guidelines, a single cluster can support up to
18 nodes.
* Workload Support: This limitation ensures optimal performance and management of resources within the Azure environment.
* Comparison of Options:
* 14 nodes: Less than the maximum supported.
* 24 nodes and 28 nodes: Exceed the maximum supported, potentially leading to performance and management issues.
* Conclusion: For supporting new workloads, the maximum number of nodes in an NC2 on Azure environment is 18.
References:
* Nutanix Clusters on Azure Technical Specifications
* Azure Virtual Machine Scale Sets Documentation
NEW QUESTION # 45
An administrator has been tasked with deploying a new production NC2 cluster on Azure and is studying the deployment requirements.
How many Azure Ready Nodes, at a minimum, must the administrator ensure are deployed withinthe cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Minimum Node Requirement: For production deployments, Nutanix typically requires a minimum of three nodes to ensure high availability and fault tolerance within the cluster.
Azure Ready Nodes: Deploying at least three Azure Ready Nodes allows the cluster to provide redundancy, ensuring that the failure of a single node does not affect the overall availability and performance of the cluster.
Reference:
Nutanix NC2 on Azure Deployment Guide
High Availability and Redundancy Best Practices
NEW QUESTION # 46
......
Nutanix NCP-CI-Azure Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Prepare With Top Rated High-quality NCP-CI-Azure Dumps For Success in Exam: https://www.test4engine.com/NCP-CI-Azure_exam-latest-braindumps.html
Get Totally Free Updates on NCP-CI-Azure Dumps PDF Questions: https://drive.google.com/open?id=1EUFfYG_5k8BjI8LhInHsms36sHYdHBP_