Buy Latest Sep 02, 2022 DES-4122 Exam Q&A PDF - One Year Free Update
Download the Latest DES-4122 Dump - 2022 DES-4122 Exam Questions
How much Dell DES-4122: Specialist - Implementation Engineer, PowerEdge Exam Cost
The price of the Dell Specialist - Implementation Engineer PowerEdge MX Modular exam fee is 230 USD.
NEW QUESTION 27
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. Operating system not installed on remote server
- B. The Virtual Console is disabled
- C. There are more than the maximum number of active sessions
- D. The server has been powered down
Answer: D
NEW QUESTION 28
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A. Enable the Collect System Inventory On Restart (CSIOR) attribute
- B. Install and configure a repository manager
- C. Configure servers to access the remote firmware repository
- D. Enable the Match Firmware of Replaced Part setting in the system BIOS
Answer: C
NEW QUESTION 29
What is required to use the iSM Automatic System Recovery feature?
- A. OS watchdog timer enabled
- B. Server Administrator not installed
- C. Server Administrator installed
- D. OS watchdog timer disabled
Answer: D
NEW QUESTION 30
What is the purpose of the Silicon-Based Hardware Root of Trust feature in Dell EMC PowerEdge 14G servers?
- A. Ensures that no unauthorized BIOS or firmware codes are run
- B. Ensures that the installed operating system is authentic
- C. Ensures that the server has a valid Service Tag number
- D. Ensures that the server boots only when connected to a verified network
Answer: A
NEW QUESTION 31
A technician is sent on-site to troubleshoot a server that produced an error message during the most recent POST, but then completed the POST and booted to the operating system. The user cannot remember the specific error and no entry was made in the error log relating to this error.
How can the technician find out what the error message was?
- A. Export the Server profile and analyze for any POST errors
- B. Reload the BIOS firmware
- C. Access the iDRAC and view the last boot cycle video capture entry
- D. Access the Lifecycle Controller and view the last boot cycle video capture entry
Answer: D
NEW QUESTION 32
A technician is creating a virtual disk in the iDRAC (2x 4 TB NL-SAS in RAID 1) to install Windows 2016 They manually boot to the OS installation media without using the Lifecycle Controller OS Deployment wizard Only the first 2048 GB on the virtual disk can be partitioned How should the technician obtain access to the remaining 2 TB (approximately) of storage?
- A. Upgrade to a newer version of the operating system
- B. Use the Lifecycle Controller OS Deployment Wizard to deploy the OS on this server
- C. Delete the 4 TB virtual disk and create a virtual (boot) disk no larger than 2048 GB
- D. Use F2 to go into the BIOS, change the BIOS boot mode to UEFI, and try again
Answer: A
NEW QUESTION 33
What is the drive characteristic of a BOSS M.2 drive in a Dell EMC PowerEdge server?
- A. Quad-level cell
- B. Write Intensive
- C. Single-level cell
- D. Read Intensive
Answer: C
NEW QUESTION 34
Which processor configuration is used by the Dell EMC PowerEdge R740 server?
- A. 2 socket AMD
- B. 4 socket AMD
- C. 4 socket Intel
- D. 2 socket Intel
Answer: D
NEW QUESTION 35
What can be done using in-band management?
- A. Remote access
- B. Agentless discovery
- C. Firmware and driver updates
- D. Network bandwidth optimization
Answer: D
NEW QUESTION 36
After completing a disk rebuild operation, a technician needs to configure the system so that the rebuild process happens faster the expense of slowing users down.
Which setting should be changed?
- A. System Profile to Performance in the BIOS settings
- B. System Profile to Performance in the iDRAC GUI
- C. Rebuild Rate in the BIOS settings
- D. Rebuild Rate in the iDRAC GUI
Answer: D
NEW QUESTION 37
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION 38
A Dell EMC PowerEdge R740 server requires a vFlash SD card urgently. Additional vFlash Cards and components from other servers are available.
What is the recommended solution?
- A. Reuse an existing vFlash SD card from either a 13G or 14G server
- B. Use a configuration option to convert an NVMe drive to a virtual vFlash
- C. Reuse an existing vFlash SD card from a 14G server
- D. Use a configuration option to convert BOSS to a virtual vFlash
Answer: C
NEW QUESTION 39
What is a valid password option available from the iDRAC9 Unique ID feature?
- A. Secure Default
- B. Encryption Default
- C. Randomly Generated
- D. Legacy Generated
Answer: C
NEW QUESTION 40
A technician needs to change the iDRAC password on a Dell EMC PowerEdge 14G server in a lights-out datacenter. The be rebooted because it is in production. The iDRAC is configured with the default credentials How could the technician change the iDRAC password?
- A. iDRAC Web GUI
- B. SupportAssist Enterprise
- C. Virtual Console; press F2 after rebooting system
- D. OpenManage Server Administrator
Answer: B
NEW QUESTION 41
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?
- A. S140
- B. H740P
- C. H330
- D. H740T
Answer: A
NEW QUESTION 42
A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?
- A. Both the iDRAC and the LCC can be rolled back
- B. The LCC can be rolled back; the iDRAC cannot be rolled back
- C. The iDRAC can be rolled back; the LCC cannot be rolled back
- D. The iDRAC cannot be rolled back and the LCC cannot be rolled back
Answer: B
NEW QUESTION 43
A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?
- A. 256 GB
- B. 512 GB
- C. 64 GB
- D. 128 GB
Answer: A
NEW QUESTION 44
A Dell EMC PowerEdge server logs the following CPU Machine Check error CPU1 IERR What action might solve the problem?
- A. Update the Intel driver
- B. Remove flea power
- C. Swap the PERC controller
- D. Reseat the IDSDM
Answer: A
NEW QUESTION 45
A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: C
NEW QUESTION 46
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC8 default credentials are customer orderable
- B. iDRAC9 offers HTML5 based GUI
- C. iDRAC8 offers HTML5 based GUI
- D. iDRAC9 default credentials are root/calvin orderable only
Answer: C
NEW QUESTION 47
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?
- A. Back up the configuration
- B. Save the license file
- C. Disable UAC
- D. Uninstall the earlier version
Answer: B
NEW QUESTION 48
What is a consideration when populating DIMMs with different types of persistent memory in a Dell EMC PowerEdge 14G server?
- A. LRDIMMs can be mixed only with RDlMMs
- B. NVDIMMs can be mixed only with LRDIMMs
- C. RDlMMs can be mixed only with NVDIMMs
- D. NVDIMMs cannot be mixed with RDlMMs
Answer: B
NEW QUESTION 49
A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?
- A. The license cannot be upgraded because the user will not allow the server to be powered on
- B. The license cannot be upgraded on a single PSU system
- C. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
- D. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down
Answer: B
NEW QUESTION 50
What is the correct order of steps taken during the BIOS/UEFI Recovery process?
Answer:
Explanation:
NEW QUESTION 51
......
Verified DES-4122 Dumps Q&As - 1 Year Free & Quickly Updates: https://www.test4engine.com/DES-4122_exam-latest-braindumps.html
Latest EMC DES-4122 Certification Practice Test Questions: https://drive.google.com/open?id=1OXimfoPz0vGjQfJWlQ1niCCT42U-hgLq