CompTIA Certified 220-1101 Dumps Questions Valid 220-1101 Materials
Current 220-1101 Exam Dumps [2023] Complete CompTIA Exam Smoothly
NEW QUESTION 95
A technician is setting up a device to use two-factor authentication. Which of the following meets this requirement?
- A. Password/password
- B. Password/PIN
- C. Thumbprint/retinal scan
- D. Password/thumbprint
Answer: D
NEW QUESTION 96
A user reports limited or no connectivity on a laptop. A technician runs ipconf ig /all with the following result:
Which of the following is the MOST likely cause of this issue?
- A. DHCP failure
- B. DNS resolution
- C. ARP cache
- D. Duplicate IP address
Answer: A
NEW QUESTION 97
A technician is configuring a new CAD workstation that has four large hard drives. The workstation will be used to edit large, critical files, so the storage configuration should be both fast and redundant. Which of the following RAID levels BEST meets these requirements?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
https://techgenix.com/raid-10-vs-raid-5/
NEW QUESTION 98
A user's computer is not receiving a network connection. The technician confirms that the connection seems to be down and looks for the user's port on the patch panel. The port and patch panel are not labeled. Which of the following network tools should the technician use to identify the port?
- A. Punchdown tool
- B. Toner probe
- C. Crimper
- D. Network tap
Answer: D
NEW QUESTION 99
While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is externally polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel. Which of the following is the MOST likely reason for this issue?
- A. The device requires a firmware update to unlock the channel.
- B. The channel selection is defective, contact the manufacturer.
- C. The channel is reserved for licensed band use.
- D. The channel must be unblocked by the vendor.
Answer: A
NEW QUESTION 100
A new version of Windows was released and a piece of software vital to the engineering department will not run on the new version. Which of the following is the BEST option to enable this department to be able to continue using this software?
- A. Do not upgrade any workstations within the organization.
- B. Purchase new workstations for the engineering department.
- C. Upgrade all workstations except those used by the engineering department.
- D. Upgrade all workstations and provide a virtual environment for the legacy software.
Answer: D
NEW QUESTION 101
A thermal punier that is used 10 print order buckets m a factory has been experiencing Issues following the failure of the alt conditioner during the summer. Each ticket has blank spots or is missing text. Which of the following would MOST likely solve these Issues?
- A. Clean the heating element.
- B. Restore function to the air conditioner.
- C. Replace the paper rolls.
- D. Install new toner.
Answer: C
NEW QUESTION 102
An online retailer would like to add capacity to support increased sales. Additional servers have been installed. Which of the following should be used to ensure each new server is being properly utilized?
- A. Round-robin DNS
- B. Load balancer
- C. Virtualization
- D. Clustering
Answer: C
NEW QUESTION 103
A technician is preparing to set up a gaming computer with the following components:
Discrete, high-end graphics card
Video capture card
High-end processor
Multiple hard drives
USB 3.0 hub
Sound card
Which of the following options is the MOST important for the technician to consider before building the gaming computer?
- A. Redundant power supply
- B. Power supply wattage rating
- C. Modular power supply
- D. 20-pin vs. 24-pin power adapter
Answer: B
NEW QUESTION 104
A thermal punier that is used 10 print order buckets m a factory has been experiencing Issues following the failure of the alt conditioner during the summer. Each ticket has blank spots or is missing text. Which of the following would MOST likely solve these Issues?
- A. Clean the heating element.
- B. Install new toner.
- C. Restore function to the air conditioner.
- D. Replace the paper rolls.
Answer: B
NEW QUESTION 105
A user reports that printed receipts have black smudges over the entire image. The text is still present but is very dark and sometimes illegible. Which of the following are the MOST likely cause and solution for the printer issue?
- A. The ribbon is jammed and is rubbing on the paper. Clear the bad ribbon and feed it through properly.
- B. The printer is loaded with the wrong type of paper. Replace the receipt paper with carbon paper.
- C. The printhead is too hot. Adjust the temperature down and retry printing.
- D. The blue ink cartridge was loaded with black ink. Put in the correct ink and clean the printhead.
Answer: B
NEW QUESTION 106
Several users who share a multifunction printer in an office have reported unintended, thin, vertical lines that cover the entire height of every page printed from the printer. Which of the following steps should a technician complete in order to MOST likely resolve this issue?
- A. Reinstall the printer driver on each computer
- B. Replace the printer paper with a new ream.
- C. Clear the print spooler on each computer.
- D. Perform the drum-cleaning procedure.
Answer: D
NEW QUESTION 107
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.
Answer:
Explanation:
NEW QUESTION 108
An end user reports that the time and date on a desktop resets after shutdown, and subsequently, the device reboots. The next day, the desktop does not load the OS and is stuck at a black screen with the following message:
Which of the following would be the BEST action to take next?
- A. Reseat the motherboard power connections.
- B. Restore the BIOS to factory default settings.
- C. Replace the CMOS battery.
- D. Change the motherboard.
Answer: C
NEW QUESTION 109
An office manager reports that a printer is experiencing performance issues. Printouts are smudging when they are handled, and. recently, whenever the manager tries to print oversized documents, the paper jams before anything is printed on it.
Answer:
Explanation:
A picture containing text, electronics, printer Description automatically generated
NEW QUESTION 110
A user is trying to play a DVD on a projector. The user can hear the audio; however, the projector is showing an error message that states:
HDMI Blocked due to Copy Protection
Which of the following is the MOST likely cause of the error?
- A. The user needs to enable cony-protected sources in the projector's settings.
- B. The user needs to switch from HDMI to a cable standard such as DisplayPort.
- C. The HDMI cannot carry the signal from the DVD to the projector.
- D. The projector does not support the necessary HDCP protocol.
Answer: C
NEW QUESTION 111
A technician is configuring a workstation to be used as a VM host. After installing the necessary software, the technician is unable to create any VMs. Which of the following actions should be performed?
- A. Enable multithreading.
- B. Enable TPM.
- C. Disable the BIOS password.
- D. Enable Fast Startup.
Answer: A
NEW QUESTION 112
While implementing a non-carrier-grade wireless backhaul, a technician notices the current channel selection is extremely polluted with various RF signals. Upon performing a spectral analysis, the technician discovers a channel containing almost no RF pollution. Unfortunately, the technician is unable to select that channel. Which of the following is the MOST likely reason for this issue?
- A. The channel must be unlocked by the vendor.
- B. The device requires a firmware update to unlock the channel.
- C. The channel is reserved for licensed band use.
- D. The channel selection is defective; contact the manufacturer.
Answer: B
NEW QUESTION 113
A technician was called in to look at a user's PC. The user reported the PC was very sluggish. The HDD light on the PC was constantly on without blinking. The PC itself was slow receiving input and took a very long time to load the OS. The technician also noticed updates had failed. Which of the following is MOST likely the cause of these issues?
- A. The HDD has no free space.
- B. The HDD cables need reseating.
- C. A RAID disk failed.
- D. The hard disk drivers have been corrupted
Answer: D
NEW QUESTION 114
A technician is receiving reports that the entire office sporadically loses network connectivity thrc cable mediums would be the MOST cost effective without sacrificing system performance?
- A. Coaxial
- B. Plenum Cat 5e
- C. Shielded Cat 6
- D. Multimode fiber
Answer: C
NEW QUESTION 115
A technician replaced a motherboard on a server, and now the 64-bit hypervisor is not loading correctly. Which of the following needs to be enabled for the hypervisor to run?
- A. VT-d
- B. Hyperthreading
- C. vPro
- D. Hardware prefetcher
Answer: A
NEW QUESTION 116
Recently, an organization received a number of spam emails that passed through the spam gateway. The emails contained generally the same information, but the sending domains were different. Which of the following solutions would BEST help mitigate the issue?
- A. Contacting the gateway vendor
- B. Editing the sender policy framework
- C. Updating the keyword filtering
- D. Verifying DMARC is enabled
Answer: D
Explanation:
DMARC (Domain-based Message Authentication, Reporting and Conformance) is an email authentication protocol. It is designed to give email domain owners the ability to protect their domain from unauthorized use, commonly known as email spoofing.
NEW QUESTION 117
A user's mobile phone gets really hot to the touch and does not retain a charge. The user also reports that the phone is very slow, especially while charging. Which of the following is MOST likely causing these symptoms?
- A. CPU overheating
- B. Digitizer failure
- C. Broken charging port
- D. Defective battery
Answer: D
NEW QUESTION 118
Which of the following cables replaced the Apple 30-pin connector and is also reversible?
- A. USB-C
- B. Lightning
- C. miniUSB
- D. DisplayPort
Answer: B
Explanation:
Lightning Connector: Apple introduced this brand-new connector back in 2012. It is over 80% smaller than the 30-pin connector and is reversible.
https://www.cablewholesale.com/support/technical_articles/whats_your_port.php#:~:text=Lightning%20Connector%3A%20Apple%20introduced%20this,pin%20connector%20and%20is%20reversible.
NEW QUESTION 119
Which of the following network devices is used to separate broadcast domains?
- A. Switch
- B. Hub
- C. Wireless access point
- D. Router
Answer: A
NEW QUESTION 120
......
220-1101 Premium PDF & Test Engine Files with 175 Questions & Answers: https://www.test4engine.com/220-1101_exam-latest-braindumps.html
Get 100% Real 220-1101 Accurate & Verified Answers As Seen in the Real Exam!: https://drive.google.com/open?id=1cY6gtKorFVzjejFZ3swsC-6KjDmKN75y