EX200 Free Exam Questions and Answers PDF Updated on Nov-2024
Latest EX200 Exam Dumps Recently Updated 136 Questions
NEW QUESTION # 15
SELinux must be running in the Enforcing mode.
Answer:
Explanation:
see explanation below.
Explanation
getenforce // Check the current mode of SELinux // SELinux runs in enforcing mode // Check getenforce 1 getenforce vim /etc/selinux/config selinux=enforcing // To temporarily enable SELinux wg sestatus
NEW QUESTION # 16
Configure autofs.
Configure the autofs automatically mount to the home directory of LDAP, as required:
server.domain11.example.com use NFS to share the home to your system. This file system contains a pre configured home directory of user ldapuserX.
Home directory of ldapuserX is:
server.domain11.example.com /home/guests/ldapuser
Home directory of ldapuserX should automatically mount to the ldapuserX of the local /home/guests Home directory's write permissions must be available for users ldapuser1's password is password
Answer:
Explanation:
yum install -y autofs
mkdir /home/rehome
/etc/auto.master
/home/rehome/etc/auto.ldap
Keep then exit
cp /etc/auto.misc /etc/auto.ldap
/etc/auto.ldap
ldapuserX -fstype=nfs,rw server.domain11.example.com:/home/guests/
Keep then exit
systemctl start autofs
systemctl enable autofs
su - ldapuserX// test
If the above solutions cannot create files or the command prompt is -bash-4.2$, it maybe exist multi-level directory, this needs to change the server.domain11.example.com:/home/guests/ to server.domain11.example.com:/home/guests/ldapuserX. What is multi-level directory? It means there is a directory of ldapuserX under the /home/guests/ldapuserX in the questions. This directory is the real directory.
NEW QUESTION # 17
Configure NTP.
Configure NTP service, Synchronize the server time, NTP server: classroom.example.com
Answer:
Explanation:
see explanation below.
Explanation
Configure the client:
Yum -y install chrony
Vim /etc/chrony.conf
Add: server classroom.example.com iburst
Start: systemctl enable chronyd
systemctl restart chronyd
Validate: timedatectl status
NEW QUESTION # 18
The system ldap.example.com provides an LDAP authentication service.
Your system should bind to this service as follows:
The base DN for the authentication service is dc=domain11, dc=example, dc=com LDAP is used to provide both account information and authentication information. The connection should be encrypted using the certificate at http://host.domain11.example.com/pub/domain11.crt When properly configured, ldapuserX should be able to log into your system, but will not have a home directory until you have completed the autofs requirement. Username: ldapuser11 Password: password
Answer:
Explanation:
system-config-authentication LDAP user DN=dc=domain11,dc=example,dc=com Server= host.domain11.example.com Certificate= http://host.domain11.example.com/pub/domain11.crt (enter url carefully, there maybe // or ..) LDAP password OK starting sssd su -ldapuser11 Display Bash prompt #exit
NEW QUESTION # 19
CORRECT TEXT
Find the files owned by harry, and copy it to catalog: /opt/dir
Answer:
Explanation:
# cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;
NEW QUESTION # 20
Configure a default software repository for your system.
One YUM has already provided to configure your system on http://server.domain11.example.com/pub/ x86_64/Server, and can be used normally.
Answer:
Explanation:
Yum-config-manager --add-repo=http://content.example.com/rhel7.0/x86-64/dvd" is to generate a file vim content.example.com_rhel7.0_x86_64_dvd.repo, Add a line gpgcheck=0 Yumcleanall Yumrepolist Almost 4305 packages are right, Wrong Yum Configuration will lead to some following questions cannot be worked out.
NEW QUESTION # 21
CORRECT TEXT
Create a 2G swap partition which take effect automatically at boot-start, and it should not affect the original swap partition.
Answer:
Explanation:
# fdisk /dev/sda
p
(check Partition table)
n
(create new partition: press e to create extended partition, press p to create the main partition, and
theextended partition is further divided into logical partitions) Enter
+2G
t
l
W
partx -a /dev/sda
partprobe
mkswap /dev/sda8
Copy UUID
swapon -a
vim /etc/fstab
UUID=XXXXX swap swap defaults 0 0
(swapon -s)
NEW QUESTION # 22
Add users: user2, user3.
The Additional group of the two users: user2, user3 is the admin group Password: redhat
Answer:
Explanation:
# useradd -G admin user2
# useradd -G admin user3
# passwd user2
redhat
# passwd user3
redhat
NEW QUESTION # 23
Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer:
Explanation:
see explanation below.
* Use fdisk /dev/hda ->To create new partition.
* Type n-> For New partition
* It will ask for Logical or Primary Partitions. Press l for logical.
* It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
* Type the Size: +100M ->You can Specify either Last cylinder of Size here.
* Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.
* Type t to change the System ID of partition.
* Type Partition Number
* Type 82 that means Linux Swap.
* Press w to write on partitions table.
* Either Reboot or use partprobe command.
* mkswap /dev/hda? ->To create Swap File system on partition.
* swapon /dev/hda? ->To enable the Swap space from partition.
* free -m ->Verify Either Swap is enabled or not.
* vi /etc/fstab/dev/hda? swap swap defaults 0 0
* Reboot the System and verify that swap is automatically enabled or not.
NEW QUESTION # 24
Create a collaborative directory/home/admins with the following characteristics:
Group ownership of /home/admins is adminuser
The directory should be readable, writable, and accessible to members of adminuser, but not to any other user.
(It is understood that root has access to all files and directories on the system.) Files created in /home/admins automatically have group ownership set to the adminuser group
Answer:
Explanation:
see explanation below.
Explanation
mkdir /home/admins
chgrp -R adminuser /home/admins
chmodg+w /home/admins
chmodg+s /home/admins
NEW QUESTION # 25
Create a new logical volume according to the following requirements:
The logical volume is named database and belongs to the datastore volume group and has a size of 50 extents.
Logical volumes in the datastore volume group should have an extent size of 16 MB.
Format the new logical volume with a ext3 filesystem.
The logical volume should be automatically mounted under /mnt/database at system boot time.
Answer:
Explanation:
see explanation below.
Explanation
fdisk -cu /dev/vda
partx -a /dev/vda
pvcreate /dev/vdax
vgcreate datastore /dev/vdax -s 16M
lvcreate-l 50 -n database datastore
mkfs.ext3 /dev/datastore/database
mkdir /mnt/database
mount /dev/datastore/database /mnt/database/ df -Th
vi /etc/fstab
/dev/datastore /database /mnt/database/ ext3 defaults 0 0 mount -a
NEW QUESTION # 26
Configure
a HTTP server, which can be accessed through http://station.domain40.example.com.
Please
download the released page from http://ip/dir/example.html.
Answer:
Explanation:
see explanation below.
Explanation
# yum install -y httpd
# chkconfig httpd on
# cd /var/www/html
#
wget http://ip/dir/example.html
# cp example.com index.html
# vim /etc/httpd/conf/httpd.conf
NameVirtualHost 192.168.0.254:80
<VirtualHost 192.168.0.254:80>
DocumentRoot /var/www/html/
ServerName station.domain40.example.com
</VirtualHost>
NEW QUESTION # 27
SIMULATION
Resize the logical volume vo and its filesystem to 290 MB. Make sure that the filesystem contents remain intact.
Note: Partitions are seldom exactly the same size requested, so a size within the range of 260 MB to 320 MiB is acceptable.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
df -hT
lvextend -L +100M /dev/vg0/vo
lvscan
xfs_growfs /home/ // home is LVM mounted directory
Note: This step is only need to do in our practice environment, you do not need to do in the real exam resize2fs /dev/vg0/vo // Use this comand to update in the real exam df -hT OR e2fsck -f/dev/vg0/vo umount /home resize2fs /dev/vg0/vo required partition capacity such as 100M lvreduce -l 100M /dev/vg0/vo mount /dev/ vg0/vo /home df -Ht
NEW QUESTION # 28
Part 1 (on Node1 Server)
Task 1 [Managing Networking]
Please create new network connection with existing interface (enp1s0) using provided values:
IPv4: 172.25.X.10/255.255.255.0 (where X is your domain number: Domain15) Gateway: 172.25.X.2 DNS server: 172.25.X.2 Add the following secondary IP addresses statically to your current running connection. Do this in a way that does not compromise your existing settings:
IPv4: 10.0.0.5/24 and set the hostname node1.domain15.example.com
Answer:
Explanation:
* [root@node1 ~]# nmcli connection show
[root@node1 ~]# nmcli connection add con-name static ifname enp1s0 type ethernet ipv4.addresses 172.25.15.10/24 ipv4.gateway 172.25.15.2 ipv4.dns 172.25.15.2
[root@node1 ~]# nmcli connection modify static ipv4.method manual connection.autoconnect yes
[root@node1 ~]# nmcli connection modify static +ipv4.addresses 10.0.0.5/24
[root@node1 ~]# nmcli connection up static
[root@node1 ~]# nmcli connection show
[root@node1 ~]# hostnamectl set-hostname node1.domain15.example.com
[root@node1 ~]# hostnamectl status
[root@node1 ~]# nmcli connection down static
* [root@node1 ~]# nmcli connection up static
[root@node1 ~]# ip addr show
[root@node1 ~]# reboot
### For checking ###
[root@node1 ~]# ip addr show
[root@node1 ~]# netstat -nr
[root@node1 ~]# cat /etc/resolv.conf
NEW QUESTION # 29
Upgrading the kernel as 2.6.36.7.1, and configure the system to Start the default kernel, keep the old kernel available.
Answer:
Explanation:
# cat /etc/grub.conf
# cd /boot
# lftp it
# get dr/dom/kernel-xxxx.rpm
# rpm -ivh kernel-xxxx.rpm
# vim /etc/grub.conf
default=0
NEW QUESTION # 30
Configure the system synchronous as 172.24.40.10.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
Graphical Interfaces:
System-->Administration-->Date & Time
OR
# system-config-date
NEW QUESTION # 31
......
Digital Format of Red Hat Certified Engineer (EX200) Exam
Red Hat Certified Engineer (EX200) certification verifies the candidate's skills in management and administration of Red Hat Enterprise Linux systems. Relevant courseware: Red Hat Enterprise Linux 7: System Administration. Engine & Engineered to take and pass. Binary format, Available at most retailers that sell books, or directly from Amazon. Context-based questions appear during the exam based on the candidate's performance in each section. Thomas Red Hat offers free training videos to enhance your learning. Open book, closed book. Preview the course content before you take the certification exam. Rare and valuable opportunities. Self-paced and expertly led. Digital format. Multiple formats available for this course: On-demand video, online audio, or downloadable audio that helps you keep your progress even when you're not online. Each section has timed questions and practice exams with detailed explanations. Reach for the stars! The goal is to help you be 100% prepared. Android app. Supported training environments are listed in the exam overview. Even if you have no prior experience with Linux systems administration, the Red Hat Certified Engineer (EX200) certification training course is an excellent way to begin your career in this exciting field.
RedHat EX200 Real 2024 Braindumps Mock Exam Dumps: https://www.test4engine.com/EX200_exam-latest-braindumps.html
EX200 Exam Questions | Real EX200 Practice Dumps: https://drive.google.com/open?id=1O27Li9p7SQuhKiQnw1JUvWsHJNY1bNUZ