JN0-1362 Dumps Updated Dec 06, 2021 Practice Test and 130 unique questions
2021 Latest 100% Exam Passing Ratio - JN0-1362 Dumps PDF
NEW QUESTION 36
Your customer is deploying a large number of Juniper WAN edge devices spread across several remote locations. The customer wants to create an isolated out-of-band management network where these devices can be securely accessed and managed using the CLI and, where possible, the WebUI Which two statements will satisfy the customer's requirements'? (Choose two)
- A. Enable the SSH and HTTPS services on each WAN edge device
- B. Ensure the devices are running the FIPS version of the Junos OS.
- C. Place all management interfaces on a common Layer 2 network
- D. Implement a management configuration group on all WAN edge devices.
Answer: A,B
NEW QUESTION 37
You are implementing an MPLS-based WAN environment to connect remote sites to the corporate headquarters (HQ) However, the service provider at the HQ location does not provide service at the location of one of the remote sites.
Which statement is true in this scenario?
- A. A circuit can be bridged across multiple service providers for end-to-end connectivity.
- B. A public WAN circuit can be provisioned over the Internet that will provide the same level of service.
- C. A hub site in a location where both service providers have a presence will need to be deployed.
- D. A dedicated leased line will need to be used to connect to the remote site.
Answer: A
NEW QUESTION 38
You 2 VPN services to interconnect three of their sites.
- A. It maintains all MPLS LSPs between the sites.
- B. It selects the appropriate circuit on which to traverse the Layer 2 VPN.
- C. It maintains all customer Layer 3 routing information.
- D. It maintains an MP-BGP session to all other sites to exchange route information for the Layer 2 VPN.
- E. In this scenario, what are two functions of the CE device? (Choose two.)
Answer: A,C
NEW QUESTION 39
You work for a service provider that currently uses a full mesh of IBGP peers to share EBGP routes. You are concerned about future scalability with this model and have decided to use route reflectors to overcome the scale limitations associated with the full mesh model.
In this scenario, which statement is true?
- A. Private autonomous system numbers must be configured on all IBGP peers.
- B. Route reflectors do not change existing IBGP next hops by default.
- C. Cluster IDs must be configured on all IBGP peers.
- D. Route reflectors readvertise both the active and backup routes
Answer: A
NEW QUESTION 40
Which three statements are true about class-of-service (CoS) schedulers? (Choose three )
- A. Schedulers determine how packets are handled during times of congestion.
- B. Schedulers determine the packet markings that are used to prioritize traffic.
- C. Schedulers determine into which queue a packet should be assigned.
- D. Schedulers determine the size of buffer assigned to each queues.
- E. Schedulers determine the packet transmission rate for each queue.
Answer: A,C,E
NEW QUESTION 41
Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.
What must be included in the VXLAN design to satisfy these requirements?
- A. nested VM capability
- B. VXLAN gateway
- C. SR-IOV
- D. VTEP tunneling
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/concept/solutionevpn
-vxlan-understanding.html
NEW QUESTION 42
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN dynamically manages customer traffic across multiple WAN connections.
- B. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- C. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- D. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
Answer: A,D
NEW QUESTION 43
You are working on a multi-Data Center interconnect (DCI) solution. Your WAN is based upon a multipoint MPLS Layer 3 VPN. This design must provide Layer 2 connectivity between the data centers across your WAN.
Which technology would satisfy the requirement?
- A. VRRP
- B. VCF
- C. RTG
- D. EVPN
Answer: D
NEW QUESTION 44
You want to migrate your network from using Draft-Rosen to multicast VPN, Due to functional similarities, it will help operations personnel make the transition if they are familiar with certain technologies In this scenario, which technology would be helpful?
- A. Layer 3 VPNs
- B. hierarchical VPLS
- C. Layer 2 VPNs
- D. VPLS with point-to-multipoint LSPs
Answer: D
NEW QUESTION 45
Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer's concern?
- A. 802 1x
- B. BGPFIowSpec
- C. MACsec
- D. 802 3ad
Answer: C
NEW QUESTION 46
What are two ways to provider redundancy in a WAN design to address physical failures? (Choose two.)
- A. Select products with different types of MICs.
- B. Select products with different versions of firmware.
- C. Select products that use MC-LAG.
- D. Select products that use multiple Routing Engines.
Answer: A,B
NEW QUESTION 47
You must build a portable and customizable template to secure the What are two components of this template? (Choose two )
- A. firewall filter
- B. generic policers
- C. routing policy
- D. stateful firewall policy
Answer: A,C
NEW QUESTION 48
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. Distributed Cloud CPE - Managed Internet
- B. SD-WAN
- C. Centralized Cloud CPE
- D. Distributed Cloud CPE - Option 1
Answer: D
NEW QUESTION 49
What are two risks when using a source-based RTBH solution? (Choose TWO)
- A. The attacker address could be a CGNAT address resulting in a larger service outage for users.
- B. The target of the attack may not support RTBH.
- C. The target of an attack would be blocked resulting in a target being offline.
- D. The attacker's address could be unknown.
Answer: A,B
NEW QUESTION 50
You are responding to an ERFP for a customer's MX-based BNG deployment that must accommodate at least 8000 subscribers. However, the customer's aggregation device only support 4094 VLANs.
Which action would you propose to solve the customer's capacity concern?
- A. Add an additional fabric module.
- B. Add an additional line card.
- C. Use stacked VLANs
- D. Use VLAN translation
Answer: B
NEW QUESTION 51
Your client asked you to design a solution with the requirements shown below.
- Have better traffic engineering for applications across an existing MPLS core.
- Support both IPv4 and IPv6 traffic
- Work with an MX Series core.
- Work with a North Star Controller
- Work with existing IGP (ISIS)
Which feature would you recommend be implemented in this solution?
- A. zero touch provisioning
- B. opaque area LSAs
- C. CoS-based forwarding
- D. segment routing
Answer: D
NEW QUESTION 52
According to Juniper Networks, which two statements describe OoB network design best practices? (Choose two.)
- A. Ensure that all users are authenticated using individual accounts and credentials.
- B. Ensure that the management network is accessible through the production network.
- C. Ensure that the management network uses a unique IP network.
- D. Ensure that only console ports are used to manage devices.
Answer: C,D
NEW QUESTION 53
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on the source address.
- B. FlowSpec can block traffic based on stateful flow information.
- C. FlowSpec requires Jflow implementation and licensing.
- D. FlowSpec can block traffic based on the destination address.
Answer: A,D
NEW QUESTION 54
Which statement is correct about learning remote host MAC addresses when your DCI is based on EVPN?
- A. Static MAC configuration on the provider edge (PE) device is perform
- B. Data plane MAC learning by the provider edge (PE) device is performed.
- C. No MAC learning by the provider edge (PE) device is performed
- D. Control plane MAC learning by the provider edge (PE) device
Answer: B
NEW QUESTION 55
A new customer asks that you extend their LAN across your WAN The customer wants to retain administrative control over all routing in their network.
Which two architectures would meet this requirement? (Choose two.)
- A. public Internet
- B. Layer 2 VPN
- C. VPLS
- D. Layer 3 VPN
Answer: B,C
NEW QUESTION 56
Which two statements about BFD are correct? (Choose two)
- A. BFD modifies each protocol timer to improve link failure detection.
- B. GRES is required for BFD sessions to be established.
- C. NSR maintains BFD sessions during Routing Engine switchover.
- D. BFD provides link failure detection for static routes.
Answer: C,D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/policy-bfd-static-routes.html
https://www.juniper.net/documentation/en_US/junos/topics/reference/requirements/nsr-systemrequireme nts.html#section-nonstop-routing-bfd-support
NEW QUESTION 57
You are designing a new deployment of Paragon Pathfinder (formerly known as NorthStar). You are asked to ensure that LSPs can be created only from Paragon Pathfinder itself.
What will accomplish this task?
- A. PCC initiated
- B. PCC delegated
- C. PCE initiated
- D. PCE delegated
Answer: D
NEW QUESTION 58
You are designing a solution for a company with a central office with several branch locations geographically dispersed. You are given the following requirements:
- provides a different bandwidth at each location,
- has any-to-any connectivity,
- offloads some network responsibility.
- is inherently isolated.
- has a simple network design.
Which statement satisfies these requirements?
- A. Implement Layer 2 VPN point-to-point circuits from each location to the central office.
- B. Implement Layer 3 VPN services at each location
- C. Implement WAN over the public Internet.
- D. Implement services on a mesh of dark fiber between each location
Answer: A
NEW QUESTION 59
......
Verified JN0-1362 dumps Q&As - 100% Pass from Test4Engine: https://www.test4engine.com/JN0-1362_exam-latest-braindumps.html