[Jul 25, 2025] Latest AZ-700 PDF Dumps & Real Tests Free Updated Today
AZ-700 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund
The Importance of Microsoft AZ-700 Exam
If an individual wants to enter the IT business, they must take the Microsoft AZ-700 exam. Though there is not much demand for these certificates, it is still important for individuals to take this exam. The importance of taking this exam will help individuals get a new job as an IT professional. Searching for free VPN service will be the best way for an individual to find free VPN providers. If an individual wants to get a new job, they must take the Microsoft AZ-700 exam before applying for the job. Ports are used to connect devices to a network. Ports are used to send and receive data using the Internet. The use of ports is critical for secure communications. Listeners are used to give information about the network that is being listened on. Microsoft AZ-700 Dumps are the best way to help an individual prepare for the exam. The use of listeners makes it easier for users to know what is happening on the network. Vmss is a virtual machine storage service. A virtual machine is created by using the Hyper-V software. Virtual machines are easily created for any use. Reach for an individual who is trying to find low-cost storage. The use of virtual machines makes it really easy to create an unlimited amount of servers for any purpose.
Fastpath can be used to install windows should the need for a windows' installation arise. Attempt in the installation of windows can be difficult without the necessary skills. Assure that the computer that is being used can be used to install windows. With that being said, there are a lot of reasons a person might want to install windows in a computer. For one, there might be a need for an individual to do something in the future. To fix global warming, an individual might need to do something in the future. To find ways to help an individual fix this issue, they must look for windows installation services. Assists in the installation of windows should the need for a window installation arise. An individual can get more from their computer by installing windows.
NEW QUESTION # 160
You have the network topology shown in the Topology exhibit. (Click the Topology tab.)
You have the Azure firewall shown in the Firewall 1 exhibit. (Click the Firewall tab.)
You have the route table shown in the RouteTable1 exhibit. (Click the RouteTable1 tab.)
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 161
You have two Azure virtual networks named Hub1 and Spoke1. Hub1 connects to an on-premises network by using a Site-to-Site VPN connection.
You are implementing peering between Hub1 and Spoke1.
You need to ensure that a virtual machine connected to Spoke1 can connect to the on-premises network through Hub1.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/hub-spoke?tabs=cli#virtual-network-peering
NEW QUESTION # 162
You have an Azure subscription that contains the resources shown in the following table.
The IP Addresses settings for Vnet1 are configured as shown in the exhibit.
You need to ensure that you can integrate WebApp1 and Vnet1.
Which three actions should you perform in sequence before you can integrate WebApp1 and Vnet1? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Modify the address space of Vnet1
2 - Deploy a VPN gateway
3 - Configure a Point-to-Site (P2S) VPN
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet#gateway-required-vnet-integration
NEW QUESTION # 163
You have an Azure subscription that contains the public IP addresses shown in the following table.
You plan to deploy a NAT gateway named NAT1.
Which public IP addresses can be used as the public IP address for NAT1?
- A. IP3 and IP5 only
- B. IP5 only
- C. IP1, IP3, and IP5 only
- D. IP2 and IP4 only
- E. IP3 only
Answer: E
Explanation:
Explanation
Only static IPv4 addresses in the Standard SKU are supported. IPv6 doesn't support NAT.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-overview
NEW QUESTION # 164
You have two Azure virtual networks named Hub1 and Spoke1. Hub1 connects to an on-premises network by using a Site-to-Site VPN connection.
You are implementing peering between Hub1 and Spoke1.
You need to ensure that a virtual machine connected to Spoke1 can connect to the on-premises network through Hub1.
How should you complete the PowerShell script? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/hub-spoke?
tabs=cli#virtual-network-peering
NEW QUESTION # 165
You have the Azure Traffic Manager profiles shown in the following table.
You plan to add the endpoints shown in the following table.
Which endpoints can you add to Profile2?
- A. Endpoint3 only
- B. Endpoint1 and Endpoint4 only
- C. Endpoint1 only
- D. Endpoint2 and Endpoint3 only
- E. Endpoint1, Endpoint2, Endpoint3, and Endpoint4
Answer: B
NEW QUESTION # 166
You need to implement name resolution for the cloud.liwareinc.com. The solution must meet the networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/dns/private-dns-autoregistration
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-name-resolution-for-vms-and-role- instances
NEW QUESTION # 167
You are planning the IP addressing for the subnets in Azure virtual networks.
Which type of resource requires IP addresses in the subnets?
- A. serviice endpoints
- B. internal load balancers
- C. storage account
- D. service endpoint policies
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/load-balancer/load-balancer-overview
NEW QUESTION # 168
You have the Azure App Service app shown in the App Service exhibit.
The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.
The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/app-service/web-sites-integrate-with-vnet
NEW QUESTION # 169
You have an Azure subscription that contains a virtual network gateway named VNetGwy1. VNetGwy1 has a public IP address of 20.25.32.214.
You need to query the health probe of VNetGwy1,
How should you complete the URI? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 170
You are implementing the virtual network requirements for VM Analyze.
What should you include in a custom route that is linked to Subnet2? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-udr-overview
NEW QUESTION # 171
You have an Azure private DNS zone named contoso.com that is linked to the virtual networks shown in the following table.
The links have auto registration enabled.
You create the virtual machines shown in the following table.
You manually add the following entry to the contoso.com zone:
Name: VM1
IP address: 10.1.10.9
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
Box 1: No
The manual DNS record will overwrite the auto-registered DNS record so VM1 will resolve to 10.1.10.9.
Box 2: No
The DNS record for VM1 is now a manually created record rather than an auto-registered record. Only auto-registered DNS records are deleted when a VM is deleted.
Box 3: No
This answer depends on how the IP address is changed. To change the IP address of a VM manually, you would need to select 'Static' as the IP address assignment. In this case, the DNS record will not be updated because only DHCP assigned IP addresses are auto-registered.
Reference:
https://docs.microsoft.com/en-us/azure/dns/dns-faq-private
NEW QUESTION # 172
SIMULATION
Task 5
You need to archive all the metrics of VNET1 to an existing storage account.
Answer:
Explanation:
See the Explanation below for step by step instructions
Explanation:
To archive all the metrics of VNET1 to an existing storage account, you can use Azure Monitor's diagnostic settings. Here's how you can do it:
Step-by-Step Solution
Step 1: Navigate to VNET1 in the Azure Portal
Open the Azure Portal.
Search for "Virtual networks" and select VNET1 from the list.
Step 2: Configure Diagnostic Settings
In the VNET1 blade, select "Diagnostic settings" under the "Monitoring" section.
Click on "Add diagnostic setting".
Step 3: Set Up the Diagnostic Setting
Enter a name for the diagnostic setting (e.g., VNET1-Metrics-Archive).
Select the metrics you want to archive. You can choose from various metrics like TotalBytesReceived, TotalBytesSent, etc.
Under "Destination details", select "Archive to a storage account".
Choose the existing storage account where you want to archive the metrics.
Configure the retention period if needed.
Step 4: Save the Configuration
Review your settings to ensure everything is correct.
Click on "Save" to apply the diagnostic setting.
Explanation:
Diagnostic Settings: These allow you to collect and route metrics and logs from your Azure resources to various destinations, including storage accounts, Log Analytics workspaces, and Event Hubs.
Metrics: Metrics provide numerical data about the performance and health of your resources. Archiving these metrics helps in long-term analysis and compliance.
Storage Account: Using an existing storage account ensures that the metrics are stored securely and can be accessed for future analysis.
By following these steps, you can ensure that all the metrics of VNET1 are archived to your existing storage account, enabling you to monitor and analyze the performance and health of your virtual network over time.
NEW QUESTION # 173
You have an Azure subscription that contains the virtual networks shown in the following table.
The subscription contains the virtual machines shown in the following table.
You create a load balancer named LB1 that has the following configurations:
* SKU: Basic
* Type: Internal
* Subnet: Subnetl2
* Virtual network VNet1
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 174
You have an Azure subscription that contains a virtual network named Vnetl. Vnetl has a /24 IPv4 address space.
You need to subdivide Vnet1. The solution must maximize the number of usable subnets.
What is the maximum number of IPv4 subnets you can create, and how many usable IP addresses will be available per subnet? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 175
You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.
Users will authenticate by using an on premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?
- A. a certification authority (CA)
- B. an Azure key vault
- C. a RADIUS server
- D. Azure Active Directory (Azure AD) Application Proxy
Answer: C
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/point-to-site-about
NEW QUESTION # 176
You need to implement a P2S VPN for the users in the branch office. The solution must meet the hybrid networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/vpn-gateway/openvpn-azure-ad-tenant
NEW QUESTION # 177
You have an Azure virtual network named Vnet1 that connects to an on-premises network.
You have an Azure Storage account named storageaccount1 that contains blob storage.
You need to configure a private endpoint for the blob storage. The solution must meet the following requirements:
Ensure that all on-premises users can access storageaccount1 through the private endpoint.
Prevent access to storageaccount1 from being interrupted.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
1 - Configuration a private endpoint on storageaccount1...
2 - Deploy a virtual machine to a subnet in Vnet1
3 - Install the DNS server role and configure the...
4 - Configure on-premises DNS servers to forward...
Reference:
https://docs.microsoft.com/en-us/azure/storage/common/storage-private-endpoints
NEW QUESTION # 178
You have an Azure subscription.
You plan to implement Azure Virtual WAN as shown in the following exhibit.
What is the minimum number of route tables that you should create?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 179
SIMULATION
Task 9
You need to ensure that subnet4-3 can accommodate 507 hosts.
Answer:
Explanation:
See the Explanation below for step by step instructions
Explanation:
Here are the steps and explanations for ensuring that subnet4-3 can accommodate 507 hosts:
To determine the subnet size that can accommodate 507 hosts, you need to use the formula: number of hosts = 2^(32 - n) - 2, where n is the number of bits in the subnet mask1. You need to find the value of n that satisfies this equation for 507 hosts.
To solve this equation, you can use trial and error or a binary search method. For example, you can start with n = 24, which is the default subnet mask for Class C networks. Then, plug in the value of n into the formula and see if it is too big or too small for 507 hosts.
If you try n = 24, you get number of hosts = 2^(32 - 24) - 2 = 254, which is too small. You need to increase the value of n to get a larger number of hosts.
If you try n = 25, you get number of hosts = 2^(32 - 25) - 2 = 510, which is just enough to accommodate 507 hosts. You can stop here or try a smaller value of n to see if it still works.
If you try n = 26, you get number of hosts = 2^(32 - 26) - 2 = 254, which is too small again. You need to decrease the value of n to get a larger number of hosts.
Therefore, the smallest value of n that can accommodate 507 hosts is n = 25. This means that the subnet mask for subnet4-3 should be /25 or 255.255.255.128 in dot-decimal notation1.
To change the subnet mask for subnet4-3, you need to go to the Azure portal and select your virtual network. Then select Subnets under Settings and select subnet4-3 from the list2.
On the Edit subnet page, under Address range (CIDR block), change the value from /24 to /25. Then select Save2.
NEW QUESTION # 180
You have an Azure subscription that contains an Azure Firewall Premium policy named FWP1.
To FWP1, you plan to add the rule collections shown in the following table.
Which priority should you assign to each rule collection? To answer, drag the appropriate priority values to the correct rule collections- Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 181
You have an Azure Traffic Manager parent profile named TM1. TM1 has two child profiles named TM2 and TM3.
TM1 uses the performance traffic-routing method and has the endpoints shown in the following table.
TM2 uses the weighted traffic-routing method with MinChildEndpoint = 2 and has the endpoints shown in the following table.
TM3 uses priority traffic-routing method and has the endpoints shown in the following table.
The App2, App4, and App6 endpoints have a degraded monitoring status.
To which endpoint is traffic directed? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point
Answer:
Explanation:
Explanation
Diagram Description automatically generated
Reference:
https://docs.microsoft.com/en-us/azure/traffic-manager/traffic-manager-nested-profiles Traffic from West Europe:
Basedd on TM1 table, West Europe will trigger TM2. However, as the MinChildEndpoint is set to 2, and App4 is degraded (down), the entire TM2 will not be considered available.
This goes back to the origin TM1 that uses performance traffic-routing method, which means the closest location is App1 and naturally be the next best performance instance.
Hence, Answer = App1
Traffic from West US:
Based on TM1 table, West US will trigger TM3. However, both App2 and App6 were degraded (down), so none of them can be considered.
This goes back to the original TM1 that uses performance traffic-routing method, from TM1, the other 2 US locations would be App2 and App3. But App2 we know it's already degraded (unavailable), hence the only option would be App3.
Answer = App3
NEW QUESTION # 182
You have an Azure subscription that contains the virtual machines shown in the following table.
Subnet1 and Subnet2 are associated to a network security group (NSG) named NSG1 that has the following outbound rule:
Priority: 100
Port: Any
Protocol: Any
Source: Any
Destination: Storage
Action: Deny
You create a private endpoint that has the following settings:
Name: Private1
Resource type: Microsoft.Storage/storageAccounts
Resource: storage1
Target sub-resource: blob
Virtual network: Vnet1
Subnet: Subnet1
For each of the following statements, select Yes of the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 183
You have an Azure subscription that contains the public IP addresses shown in the following table.
You plan to deploy a NAT gateway named NAT1.
Which public IP addresses can be used as the public IP address for NAT1?
- A. IP3 and IP5 only
- B. IP5 only
- C. IP1, IP3, and IP5 only
- D. IP2 and IP4 only
- E. IP3 only
Answer: E
Explanation:
Only static IPv4 addresses in the Standard SKU are supported. IPv6 doesn't support NAT.
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/nat-gateway/nat-overview
NEW QUESTION # 184
You have an Azure subscription that contains the resources shown in the following table.
The virtual network topology is shown in the following exhibit.
Firewall1 is configured as shown in following exhibit.
FirewallPolicy1 contains the following rules:
* Allow outbound traffic from Vnet1 and Vnet2 to the internet.
* Allow any traffic between Vnet1 and Vnet2.
No custom private endpoints. service endpoints. routing tables, or network security groups (NSGs) were created. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE:
Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 185
......
Microsoft AZ-700 certification exam is suitable for IT professionals from various backgrounds, including network administrators, network engineers, cloud architects, and security engineers. Designing and Implementing Microsoft Azure Networking Solutions certification exam is an excellent opportunity for IT professionals to validate their skills and knowledge in Azure networking solutions and enhance their career prospects. Designing and Implementing Microsoft Azure Networking Solutions certification exam is available globally and provides a recognized and valuable credential for IT professionals who want to advance their careers in the cloud computing industry.
Microsoft AZ-700 (Designing and Implementing Microsoft Azure Networking Solutions) certification exam is designed for professionals who want to demonstrate their expertise in designing and implementing networking solutions on the Microsoft Azure platform. Designing and Implementing Microsoft Azure Networking Solutions certification exam is ideal for network architects, network engineers, and cloud solution architects who want to validate their skills in Azure networking.
2025 Valid AZ-700 test answers & Microsoft Exam PDF: https://www.test4engine.com/AZ-700_exam-latest-braindumps.html
Pass Microsoft AZ-700 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=1wfKYHsW5MEJIeZhIaeF2KaOVPoDIRuLS