[Jul 30, 2023] Genuine C1000-082 Exam Dumps Free Demo [Q21-Q46]

[Jul 30, 2023] Genuine C1000-082 Exam Dumps Free Demo

Printable & Easy to Use IBM Certified Administrator C1000-082 Dumps 100% Same Q&A In Your Real Exam

IBM C1000-082 certification exam is a valuable credential that can help you stand out in the competitive IT job market. It is also a prerequisite for other advanced certifications in IBM Spectrum Protect. By passing C1000-082 exam, you will be able to demonstrate your knowledge and skills in administering IBM Spectrum Protect V8.1.9 and gain recognition as a certified IBM professional.

 

NEW QUESTION # 21
Which three parameters are required to set server-to-server communication?

• A. admin name
• B. low level address
• C. high level address
• D. server password
• E. server certificate
• F. admin password

Answer: B,C,D

Explanation:
According to IBM documentation1, to define a server for server-to-server communications, you need to use the DEFINE SERVER command and specify three parameters: SERVERNAME, HLADDRESS, and LLADDRESS. The SERVERNAME parameter is the name of the server that you are defining. The HLADDRESS parameter is the high-level address of the server that you are defining. The LLADDRESS parameter is the low-level address of the server that you are defining.

NEW QUESTION # 22
Which type of client backup can be restored without having access to the server?

• A. full backup
• B. backupset
• C. retentionset
• D. journal-based backup

Answer: B

Explanation:
According to IBM documentation1, a backup set is a collection of your files that reside on the server, onto portable media created on a device using a format that is compatible with the client device. You can restore data from a backup set without having access to the server by using the dsmc restore backupset command1.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data

NEW QUESTION # 23
Which process needs to be run before automatic failover can occur?

• A. data deduplication
• B. tier to tape
• C. migration
• D. node replication

Answer: D

Explanation:
In IBM Spectrum Protect, automatic failover can occur when a primary node fails and a secondary node takes over its responsibilities. In order for this to work, the secondary node must be an exact copy of the primary node. This is achieved through node replication, which synchronizes the data and configuration between the primary and secondary nodes.
Node replication is a process that needs to be set up and run before automatic failover can occur. It involves creating a copy of the primary node and configuring it as a secondary node. The data and configuration are then synchronized between the two nodes, either continuously or on a schedule.
Once node replication is set up, the secondary node can take over the primary node's responsibilities in the event of a failure, without any interruption in service.
To summarize, node replication is the process that needs to be run before automatic failover can occur in IBM Spectrum Protect.

NEW QUESTION # 24
How can IBM Spectrum Protect recovery log usage be obtained?

• A. QUERY DBLOG
• B. QUERY DB T=LOG
• C. QUERY LOG
• D. QUERY DBSPACE

Answer: A

Explanation:
You can use the QUERY DBLOG command in Spectrum Protect to obtain recovery log usage. This command displays information about the logs that are currently active and the logs that have been archived or deleted. Specifically, the command provides details about the total amount of recovery log space allocated, the amount of space currently used, and the amount of space that is still available for use.
To run this command, you can use the following steps:
Open the Spectrum Protect Administrative Client.
Connect to the Spectrum Protect instance.
In the command line, type q dblog.
Press Enter.
Once you execute the command, you will see the information about the recovery log usage displayed on the screen.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=utilities-administrative-commands

NEW QUESTION # 25
A technician has removed all the tapes from a tape library to work on the gripper. When finished, the tapes are returned to random slots. Which command should be done on the IBM Spectrum Protect server to ensure the library inventory is correct?

• A. AUDIT LIBRARY
• B. UPDATE INVENTORY
• C. AUTOLOADER INVENTORY
• D. LABEL LIBVOL

Answer: A

Explanation:
According to IBM Spectrum Protect documentation1, a command that should be done on the IBM Spectrum Protect server to ensure the library inventory is correct is AUDIT LIBRARY2. AUDIT LIBRARY is a command that synchronizes the server inventory with the inventory of the library device. It can detect and resolve inconsistencies between the two inventories, such as missing or relocated volumes.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=utilities-administrative-commands
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=ac-audit-library-audit-volume-inventories-in-automated-library

NEW QUESTION # 26
Which option should be specified when configuring a storage agent for optimal LAN-free backup and restore performance?

• A. LANFREESSL SHAREDMEM
• B. LANFREESHM YES
• C. ENABLELANFREE SHMMEM
• D. IANFREECOMMMETHOD SHAREDMEM

Answer: B

Explanation:
According to the IBM Spectrum Protect and Spectrum Scale Integration Guide1, one option that should be specified when configuring a storage agent for optimal LAN-free backup and restore performance is LANFREESHM YES. This option enables the use of shared memory for communication between the storage agent and the server, which can improve throughput and reduce CPU usage.
https://community.ibm.com/community/user/storage/blogs/nils-haustein1/2020/02/29/lan-free-backup-ibm-spectrumscale

NEW QUESTION # 27
Which information is displayed by the QUERY OCCUPANCY command?

• A. the number of extents being stored for the node
• B. the name of the storage pool that contains the backup data
• C. the date of the most recent backup
• D. the value for saved space occupied for deduplicated data

Answer: B

Explanation:
According to IBM's documentation1, the QUERY OCCUPANCY command shows where client file spaces are stored and how much space they occupy. The information displayed by this command includes:
The node name
The file space name
The storage pool name
The device class name
The number of files
The physical space occupied
The logical space occupied
The deduplication ratio
https://www.ibm.com/docs/SSEQVQ_8.1.7/srv.reference/r_cmd_occupancy_query.html

NEW QUESTION # 28
What is the purpose of the client option TXNBYTELIMIT?

• A. It sets the maximum number of objects in a client session transaction.
• B. It sets the maximum size included in a single client session transaction.
• C. It sets the maximum number of client session transactions during the backup window.
• D. It sets the maximum size of an upload transaction between IBM Spectrum Protect and IBM Spectrum Protect Plus.

Answer: B

Explanation:
According to IBM documentation1, the client option TXNBYTELIMIT specifies the number of kilobytes that the client program buffers before sending data to the server. This option affects how often data is sent to the server during backup and archive operations.
https://www.ibm.com/docs/SSEQVQ_8.1.8/client/c_opt_clioptref.html

NEW QUESTION # 29
Which command defines or deletes all drives and their paths for a single library in one step?

• A. DEFINE LIBRARY with SANDISCOVERY=ON
• B. DEFINE DRIVE with AUTODETECT=ON
• C. PERFORM LIBACTION with SANDISCOVERY=ON
• D. AUDIT LIBRARY with AUTODISCOVERY=ON

Answer: C

Explanation:
According to the IBM Spectrum Protect documentation1, one command that defines or deletes all drives and their paths for a single library in one step is PERFORM LIBACTION with SANDISCOVERY=ON. This command performs a SAN discovery operation on a SCSI or VTL library and automatically defines or deletes all drives and paths that are associated with the library.
https://www.ibm.com/docs/en/spectrum-protect/8.1.7?topic=commands-define-drive-define-drive-library

NEW QUESTION # 30
What is the default value for collocation defining a primary sequential storage pool?

• A. filespace
• B. yes
• C. group
• D. node

Answer: C

Explanation:
This means that, by default, files from different clients are grouped together in storage pool volumes to optimize space utilization. This information is available in the IBM Spectrum Protect for AIX [1]: Administrator's Reference, which is one of the official documentation resources for this product.
https://www.ibm.com/docs/en/spectrum-protect/8.1.14?topic=storage-optimizing-operations-by-enabling-collocation-client-files

NEW QUESTION # 31
Which feature allows quiescing of database applications in Hyper-V and VMware virtual environments?

• A. Database Manager Recovery
• B. Database Autoquiesce
• C. Application Aware backups
• D. Database Log Recovery

Answer: C

Explanation:
According to IBM documentation1, Application Aware backups allow quiescing of database applications in Hyper-V and VMware virtual environments. Application Aware backups use Microsoft Volume Shadow Copy Service (VSS) or VMware Tools to create a consistent snapshot of the application data.
IBM Spectrum Protect - IBM Documentation

NEW QUESTION # 32
Which component is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server?

• A. perfmon
• B. systemview
• C. datacollect
• D. servermon

Answer: B

Explanation:
According to IBM Spectrum Protect documentation1, a component that is automatically installed and configured during IBM Spectrum Protect installation that collects data to be used by support in case of any problem with the server is systemview1. Systemview is a tool that collects configuration and performance data from IBM Spectrum Protect servers and clients. It can help diagnose problems and optimize performance. https://www.ibm.com/support/pages/collecting-data-spectrum-protect-v7-server-install-or-upgrade

NEW QUESTION # 33
To specify whether the client acceptor daemon service (CAD) manages the scheduler, add the MANAGEDSERVICES option in which configuration file on Linux?

• A. dsm.sys
• B. dsmserv.opt
• C. sched.log
• D. backup.config

Answer: A

Explanation:
To specify whether the client acceptor daemon service (CAD) manages the scheduler, you need to add the MANAGEDSERVICES option in the client system-options file on Linux1. The client system-options file is named dsm.sys by default1. You can use this option to reduce the number of background processes on your workstation by letting the client acceptor daemon start and stop the scheduler process as needed for each scheduled action23.

NEW QUESTION # 34
When is the SESSIONSECURITY parameter of TRANSITIONAL used?

• A. when a client must double-hop (transit) through a stateless firewall that does not support SSL communication
• B. when using LDAP or AD security for a client authentication
• C. when running a supported client below version V8.1.2
• D. when passwords less than 8 characters are used on a client

Answer: C

Explanation:
According to IBM documentation1, the SESSIONSECURITY parameter of TRANSITIONAL is used when you want to use the existing communication protocol while you update your IBM Spectrum Protect software to V8.1.2 or later. This is the default value.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=ss-security-concepts

NEW QUESTION # 35
Which client component has to be installed in a custom install on Linux?

• A. Client GUI
• B. backup-archive client Web files
• C. Web user interface files
• D. Client API

Answer: D

Explanation:
The Client API allows applications to directly access the storage services provided by IBM Spectrum Protect, whereas the other options are not necessary for a custom Linux install. However, it's important to note that the specific components required for a custom install may vary depending on the individual needs and requirements of the installation.
https://www.ibm.com/docs/SSEQVQ_8.1.9/client/c_inst.html

NEW QUESTION # 36
What is required on the IBM Spectrum Protect Server to accept data from IBM Spectrum Protect Plus?

• A. the object agent
• B. the deduplication cache
• C. the S3 consolidation pool
• D. the Operations Center

Answer: A

Explanation:
According to IBM Spectrum Protect Plus overview1, you need the object agent to accept data from IBM Spectrum Protect Plus. The object agent is a component of IBM Spectrum Protect that enables you to back up and restore data on cloud object storage devices1. You also need to configure the offload settings on IBM Spectrum Protect Plus and create an S3 consolidation pool on IBM Spectrum Protect2. For more details, you can refer to the IBM Spectrum Protect V8.1.9 documents345.

NEW QUESTION # 37
Who can issue the REPAIR STGPOOL command?

• A. any admin who has been designated as an approval administrator
• B. any admin with Storage privilege class or higher who has been designated as an approval administrator
• C. only an admin with System privilege class
• D. only an admin with Policy privilege class or higher

Answer: A

Explanation:
According to IBM documentation1, the REPAIR STGPOOL command is a restricted command that requires authorization from an approval administrator. An approval administrator is an administrative user who has been designated as an approver for restricted commands by using the SET APPROVALADMIN command2.

NEW QUESTION # 38
Which option is used to restore the most recent backup version of a file, even if the backup is inactive?

• A. CURRENT
• B. LATEST
• C. INACTIVE
• D. IFN EWER

Answer: B

Explanation:
According to the IBM Spectrum Protect V8.1.9 documentation, the option to restore the most recent backup version of a file, even if the backup is inactive, is the LATEST option. This option will restore the last backup version of a file regardless of the backup's status.
Here is an example command using the LATEST option to restore a file:
restore /home/user1/testfile -latest
This command will restore the most recent backup version of the file "testfile" regardless of whether the backup is active or inactive.
https://www.ibm.com/docs/en/spectrum-protect/8.1.12?topic=clients-restoring-your-data

NEW QUESTION # 39
Which kind of scheduling is affected by the RANDOMIZATION parameter?

• A. server-prompted
• B. server-polling
• C. client-polling
• D. client-prompted

Answer: C

Explanation:
The RANDOMIZATION parameter sets randomized start times within the startup window of each schedule for clients by using the client-polling scheduling mode1. A startup window is the start time and duration during which a schedule must be initiated. The RANDOMIZATION parameter does not affect other scheduling modes such as server-polling, client-prompted, or server-prompted.
https://www.ibm.com/docs/en/spectrum-protect/8.1.2?topic=commands-set-randomize-set-randomization-scheduled-start-times

NEW QUESTION # 40
What are three required components of an IBM Spectrum Protect server?

• A. archive log failover
• B. instance directory
• C. database
• D. directory-container storage pool
• E. active log mirror
• F. archive log

Answer: B,C,E

Explanation:
According to the IBM Documentation1, three required components of an IBM Spectrum Protect server are:
Database: The database stores information about server operations, client nodes, storage pools, backup data, and other server-related data. The database is essential for server operation and recovery.
Active log: The active log records changes to the database that occur during normal server operation. The active log is used to recover the database after a system failure or a planned shutdown.
Instance directory: The instance directory contains configuration files, license files, security files, and other files that are specific to a server instance. The instance directory is also used to store temporary files during server operation.
https://www.ibm.com/docs/en/spectrum-protect/8.1.9?topic=servers-whats-new

NEW QUESTION # 41
Which SCHEDMODE enables the scheduler to process the client deployment schedule immediately?

• A. polling
• B. immediate
• C. initial
• D. prompted

Answer: D

Explanation:
According to IBM documentation1, SCHEDMODE prompted enables the scheduler to process the client deployment schedule immediately. SCHEDMODE prompted can be used with the autodeploy option to start a backup operation as soon as a new client node is registered.
Schedmode - IBM Documentation

NEW QUESTION # 42
Which function does the UPDATE NODE command allow?

• A. modify the node's dsm.opt file
• B. set if deduplication can occur for this node
• C. rename the node
• D. change which IBM Spectrum Protect server the node backs up to

Answer: C

Explanation:
the UPDATE NODE command allows you to update node attributes, such as node name, password, policy domain, management class, deduplication settings, replication settings, and more1

NEW QUESTION # 43
What is the purpose of the VALIDATE REPLPOLICY command?

• A. verify the status of replication storage rules
• B. compare the policies on the source and target replication servers
• C. ensure the policies are replicated from the source to the target replication server
• D. validate which nodes are configured for replication

Answer: B

Explanation:
According to the web search results, the best answer is C. compare the policies on the source and target replication servers. This command is used to verify that the policies on the target replication server match those on the source replication server1.

NEW QUESTION # 44
A file is backed up once and then inadvertently deleted. Ten days later the mistake is discovered. Which backup copy group option must be set properly to be sure the file can be restored?

• A. RETMIN
• B. RETEXTRA
• C. RETONLY .
• D. RETDELETED

Answer: B

Explanation:
To restore a file that was inadvertently deleted, you need to have a backup copy of the file available. The RETEXTRA option in a backup copy group specifies that extra versions of files are kept even if the files are deleted from the active file system. This means that older versions of files are retained beyond their normal retention period, allowing you to restore files that were inadvertently deleted.

NEW QUESTION # 45
What is a requirement for restoring individual files from an NDMP backup with the backup/archive client GUI?

• A. TOCDESTINATION must be selected in front of the restore.
• B. Table of Contents (TOC) must be created during the backup.
• C. The NDMP API extension must be installed on the client.
• D. The FILELEVEL option must be enabled on the NAS Filer.

Answer: B

Explanation:
According to IBM documentation1, one of the requirements for restoring individual files from an NDMP backup with the backup/archive client GUI is that a Table of Contents (TOC) must be created during the backup. The TOC contains file-level restore information that is used by the backup/archive client GUI to display and select files for restore. The TOC is stored in a different storage pool from the one where the backup image is stored.
https://www.ibm.com/docs/en/spectrum-protect/8.1.11?topic=servers-file-level-backup-restore-ndmp-operations

NEW QUESTION # 46
......

C1000-082 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://www.test4engine.com/C1000-082_exam-latest-braindumps.html

All Obstacles During C1000-082 Exam Preparation with C1000-082 Real Test Questions: https://drive.google.com/open?id=1LzLZHQT7TyAjiUTXlg_yWanrCPlTdcLm