Prepare for your exam certification with our 300-610 Certified Cisco
Free Cisco 300-610 Exam 2024 Practice Materials Collection
The right way to be prepared for the Cisco 300-610 Exam
In the first place, you need to make sure that you are prepared for the Cisco 300-610 exam. You will find that there are many different sources of information, some of them are better than others. The best kinds of Cisco 300-610 exam preparation materials are those that offer more than just a few questions and answers. You will find that most online Cisco 300-610 study guides offer this kind of help as well, making it easier for you to learn. A lot of these materials have been created by people who have taken the test and passed, so they know what it takes to pass the test. They can show you what you need to know in order to do well on the exam. The second thing you should do is create an effective study schedule. Many people think that they can simply study in spurts and then cram before the test date, but this is not usually a good idea with such a high stakes test as the Cisco 300-610 Dumps. You will want to make sure that you cover all of your bases in terms of studying for the exams, and it's important to create a schedule for yourself so you can keep up with your progress. If you follow these two steps, then you should be prepared for your Cisco 300-610 Exam.
NEW QUESTION # 41
A network engineer designs a Cisco Nexus data center network for a client-server farm using a pair of Nexus 9000 Series. Switches In a vPC setup. Each server connects with two interfaces to both Nexus switches. The Nexus switches must always initiate the negotiation with the server. Which feature should be used in this design to ensure traffic is forwarded from the server to the data center network?
- A. LACP mode auto
- B. LACP mode active
- C. PAgP mode desirable
- D. PAgp mode auto
Answer: B
NEW QUESTION # 42
Which element is the main functional component of the architecture that separates the internal fabric and the external network that connects sites when VXLAN EVPN is deployed multisite?
- A. border leaf
- B. service leaf
- C. border gateway
- D. service gateway
Answer: C
Explanation:
The main functional component of the EVPN Multi-Site architecture is the border gateway, or BGW. BGWs separate the fabric-side (site-internal fabric) from the network that interconnects the sites (site-external DCI) and mask the site-internal VTEPs.
link:https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series- switches/white-paper-c11-739942.html
NEW QUESTION # 43
An engineer must design Layer 2 connectivity for a subnet between two data centers. The engineer must ensure seamless host mobility and optimal first-hop routing. Which attribute must be synchronized across all data centers to achieve this goal?
- A. multicast group
- B. anycast gateway MAC
- C. NX-OS version
- D. DCNM to manage both fabrics
Answer: B
NEW QUESTION # 44
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 45
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 46
An engineer must interconnect customer data centers by using a 10-Gbps, unicast-only, Layer 3 circuit. The requirement is to stretch the Layer 2 connection over the tunnel, isolate STP traffic, and create more than two million logical network segments. Which solution meets these requirements?
- A. VXLAN EVPN
- B. dark fiber
- C. IPsec over GRE
- D. OTV
Answer: A
NEW QUESTION # 47
An engineer must design a VXLAN EVPN network. The solution should optimize broadcast, unknown unicast, and multicast (BUM) and short BUM replication, and use PIM anycast RP.
Which solution should be included in the design?
- A. head-end replication
- B. PIM dense mode
- C. ingress replication
- D. PIM sparse mode
Answer: C
Explanation:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white- paper-c11-739942.html
NEW QUESTION # 48
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
- A. MSDP
- B. Phantom RP
- C. PIM anycast RP
- D. Embedded RP
Answer: C
NEW QUESTION # 49
An engineer is building a data center network with VXLAN EVPN. The requirement is to use multicast for the broadcast, unknown unicast, and multicast replication.
Which two VNI to multicast group mapping methods must be used to meet these requirements? (Choose two.)
- A. many VNI to many multicast groups
- B. one VNI to one multicast group
- C. one NVE to many multicast groups
- D. many NVE to one multicast group
- E. many VNI to one multicast group
Answer: C,E
NEW QUESTION # 50
Refer to the exhibit.
Server 1 fails to connect to the storage array over the Storage Area Network (SAN) of the Cisco NDS 9000 Series Switch. The requirements are to redesign the storage network and keep these considerations in mind:
The traffic from each of the server must be redundant and isolated.
The design must tolerate hardware and software failures and upgrades of SAN fabric devices.
Which action must be taken to meet these requirements?
- A. Create a SAN port channel that faces the storage device to sustain a link failure.
- B. Place an additional Fibre Channel switch to create two physically independent storage fabrics.
- C. Enable NPV and F-Port-channel on ports that face Server 1 on the Fibre Channel switch to create redundant paths.
- D. Add an additional supervisor to the Fibre Channel switch to support nondisruptive upgrades.
Answer: C
NEW QUESTION # 51
DRAG DROP
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Select and Place:
Answer:
Explanation:
Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/virtual_device_context/ configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual-Device-Context-Configuration-Guide/ creating-vdc.html
NEW QUESTION # 52
Drag and Drop Question
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-
os/virtual_device_context/configuration/guide/b-7k-Cisco-Nexus-7000-Series-NX-OS-Virtual- Device-Context-Configuration-Guide/creating-vdc.html
NEW QUESTION # 53
An engineer must choose the World Wide Port Name for the Cisco UCS Fibre Channel virtual host bus adapter.
Which identifier must be used?
- A. fe80::314e:4566:8702:bf3d
- B. iqn.2021-08.com.acme:3xxx
- C. 20:00:00:25:B5:97:c3:ac
- D. naa.600a09840691712159764d
Answer: C
NEW QUESTION # 54
A customer needs a design for a new network. VLANs must be dynamically provisioned based on the information received from connected hosts. No Layer 2 or Layer 3 configuration must be performed on the related switch ports.
Which feature must be used?
- A. Network PnP
- B. POAP
- C. iPXE
- D. VM Tracker
Answer: B
NEW QUESTION # 55
What are two advantages of using Cisco vPC over traditional access layer designs? (Choose two.)
- A. maintains single control plane
- B. no spanning-tree blocked ports
- C. supports Layer 3 port channels
- D. uses all available uplink bandwidth
- E. disables spanning-tree
Answer: B,D
Explanation:
vPC provides the following technical benefits:
- Eliminates Spanning Tree Protocol (STP) blocked ports
- Uses all available uplink bandwidth
- Allows dual-homed servers to operate in active-active mode
- Provides fast convergence upon link or device failure
- Offers dual active/active default gateways for servers vPC also leverages native split horizon/loop management provided by port-channeling technology: a packet entering a port- channel cannot immediately exit that same port-channel.
https://www.cisco.com/c/dam/en/us/td/docs/switches/datacenter/sw/design/vpc_design/vpc_best_ practices_design_guide.pdf
NEW QUESTION # 56
A network engineer must perform a VMM integration for the VMWare vCenter platform with the Cisco ACI Fabric. The vCenter is already installed in one of the rack servers connected to ACI leaf switches in a vPC mode.
Which type of management network must be used to integrate vCenter with ACI?
- A. ARC infra
- B. In-band management
- C. VLAN infra
- D. out-of-band management
Answer: D
NEW QUESTION # 57
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. Inter-site network
- B. DC interconnect
- C. spanning tree protocol
- D. VRF-lite
- E. Distributed anycast gateway
Answer: B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-12/configuration_guide/vxlan/b_1612_bgp_evpn_vxlan_9300_cg/configuring_evpn_vxlan_anycast_gateway.html
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION # 58
An engineer configured the OSPF protocol in the vPC topology. During the catastrophic failure of one of the vPC the member switches, the traffic was routed to a black hole. This route was caused by the long convergence time caused by the delay of the of the vPC member switch reboot. After the failure, the engineer rebooted both switches, but the secondary switch powered on before the primary one. It caused all the vPCs to be shut down due to consistency-check violations. Which two features must be used to prevent these situations from happening in the future? (Choose two.)
- A. delay restore
- B. auto-recovery
- C. system priority
- D. peer-gateway
- E. ip arp synchronize
Answer: A,B
Explanation:
System priority is related to LACP, not vPC, so it is out. ARP s
Reference:
https://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/nx-os-software/212589-understanding-vpc-election-process.html
NEW QUESTION # 59
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. inline load-balancing device
- B. Layer 4 to Layer 7 device package
- C. ITD
- D. BGP ECMP
Answer: B
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
NEW QUESTION # 60
Drag and Drop Question
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
Explanation:
https://www.cisco.com/c/en/us/support/docs/lan-switching/spanning-tree-protocol/10591-77.html
NEW QUESTION # 61
Refer to the exhibit. A Cisco engineer is configuring an active/active design that consists of Cisco Nexus 7000 Series Switches with Fabric Extenders using a vPC. The desired outcome is to allow the connection of servers/storage/devices to a single FEX, and use the FEX port channels to each parent switch to provide redundancy. The engineer configures FEX and FEX ID to be identical on both sides. During initial tests, an issue occurs with the straight-through FEX and active/active FEX configuration. What is the most probable reason?
- A. They are not enabled on vPC+ deployments.
- B. FEX-AA is not a supported F-Series module.
- C. They cannot exist on the same ASIC instance.
- D. Full duplex is disabled for FEX connectivity.
Answer: C
NEW QUESTION # 62
......
What is Cisco 300-610 Exam certification?
Cisco 300-610 Exam certification is an IT certification that is advanced in the field of computer networking. It is a professional exam that is designed to test the skills and expertise of IT professionals. The Cisco 300-610 Exam certification exam is designed to test the competency of the IT professionals to plan, design, maintain and monitor the Cisco Data Center Infrastructure. This exam validates that you have all the skills and knowledge required to install, configure, troubleshoot and monitor a Cisco Data Center Infrastructure which includes Cisco Nexus Switches and Cisco Unified Computing System (UCS). Credit voucher greatly varies suggests. As compared to other similar IT certifications like Checkpoint Certified Security Expert R77.10, this Cisco 300-610 Exam certification exam is considered more difficult as it covers a wide range of topics related to networking infrastructure. 300-610 Dumps is an online, self-paced training package that helps you prepare for the exam.
Pass Cisco 300-610 Actual Free Exam Q&As Updated Dump: https://www.test4engine.com/300-610_exam-latest-braindumps.html
300-610 Exam Info and Free Practice Test All-in-One Exam Guide Nov-2024: https://drive.google.com/open?id=1fa6PDWi1_B9TAiSwtUc2Rlu5eF3zd9PD