
Try 100% Updated 156-581 Exam Questions [2023]
Pass 156-581 Exam - Real Questions and Answers
NEW QUESTION # 15
Where do Protocol parsers register themselves for IPS?
- A. Passive Streaming Library
- B. Protections database
- C. Other handlers register to Protocol parser
- D. Context Management Infrastructure
Answer: C
NEW QUESTION # 16
Is it possible to analyze ICMP packets with tcpdump?
- A. No, use fw monitor instead
- B. Yes, tcpdump is not limited to tcp specific issues
- C. No, since ICMP does not have any source or destination ports, but specification of port numbers is mandatory
- D. No, tcpdump works from layer 4. ICMP is located in the network layer (layer 3), therefore is not applicable to this scenario
Answer: C
NEW QUESTION # 17
Which command shows the installed licenses and contracts on a Check Point device?
- A. cplicenses print -x
- B. cplic print -s
- C. cplic print -x
- D. fwlic print -x
Answer: C
NEW QUESTION # 18
What are some measures you can take to prevent IPS false positives?
- A. Capture packets, Update the IPS database, and Back up custom IPS files
- B. Exclude problematic services from being protected by IPS (sip, H.323, etc.)
- C. Use Recommended IPS profile
- D. Use IPS only in Detect mode
Answer: B
NEW QUESTION # 19
Which of the following is a valid way to capture general packets on Check Point gateways?
- A. tcpdump
- B. Wireshark
- C. Firewall logs
- D. Network taps
Answer: A
NEW QUESTION # 20
Which if the following is NOT an account user classification?
- A. Administrator
- B. Licensers
- C. Manager
- D. Viewer
Answer: C
NEW QUESTION # 21
Some users from your organization have been reporting some connection problems with CIFS since this morning. You suspect an IPS issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS chain module (position
4 in the chain) to check if the packets pass the IPS. What command do you need to run?
- A. fw monitor -pI asm <filterexpression>
- B. fw monitor -mI -pI 5 -e <filterexperession>
- C. fw monitor -pi 5 -e <filterexpression>
- D. tcpdump -eni any <fitterexpression>
Answer: B
NEW QUESTION # 22
After deploying a new Static NAT configuration, traffic is not getting through.
What command would you use to troubleshoot internal problems with the NAT traffic?
- A. cp ctt zdebug + xlate xltrc nat
- B. fw ctl kdebug + xlate xltrc nat
- C. fw ctl zdebug + xlate xltrc nat
- D. cp ctl kdebug + xlate xltrc nat
Answer: C
NEW QUESTION # 23
Which of the following is NOT a way to insert fw monitor into the chain when troubleshooting packets throughout the chain?
- A. Relative position using location
- B. Absolution position
- C. Relative position using id
- D. Relative position using alias
Answer: A
NEW QUESTION # 24
The Identity Awareness process that receives identity data from the identity sources and organizes it in tables before forwarding the data to the enforcement module is called
- A. pdp
- B. iaforward
- C. pep
- D. iasend
Answer: A
NEW QUESTION # 25
Which of the following CLI commands is best to use for getting a quick look at appliance performance information in Gaia?
- A. fw stat
- B. top
- C. fw monitor
- D. cphaprob stat
Answer: B
NEW QUESTION # 26
What would be the most likely response when attempting to use SmartConsole to connect to a management server with the wrong credentials?
- A. "Server down on unresponsive"
- B. "invalid username or password"
- C. "Incorrect name or IP address"
- D. "Authentication to server failed"
Answer: D
NEW QUESTION # 27
The default time out for policy installation is
- A. 90 seconds
- B. 600 seconds
- C. 300 seconds
- D. 150 seconds
Answer: C
NEW QUESTION # 28
The IPS detection incorporates four layers. Which one of these four layers performs various security checks to ensure compliance to protocol standards checking for any existing anomalies?
The checks usually involve RFC compliance. It also logically segments the data into contexts that may be taken from the request header and body
- A. Protocol Parser
- B. Passive Streaming Library
- C. Context Management
- D. Protections
Answer: A
NEW QUESTION # 29
The customer is using Check Point appliances that were configured long ago by third-party administrators. Current policy includes different enabled IPS protections and Bypass Under Load function. Bypass Under Load is configured to disable IPS inspections if CPU and Memory usage is higher than 80%. The Customer reports that IPS protections are not working at all regardless of CPU and Memory usage. What is a possible reason of such behavior?
- A. The kernel parameter ids_tolerance_stress is set to 10
- B. The kernel parameter ids_assume_stress is set to 1
- C. The kernel parameter ids_tolerance_no_stress is set to 10
- D. The kernel parameter ids_assume_stress is set to O
Answer: A
NEW QUESTION # 30
Which is the correct 'fw monitor syntax for creating a capture file for loading it into Wireshark?
- A. fw monitor -e 'accept <FILTER EXPRESSION>: -file Output.cap
- B. This cannot be accomplished as it is not supported with R80.10
- C. fw monitor -e 'accept <FILTER EXPRESSION>; Output.cap
- D. fw monitor -e 'accept <FILTER EXPRESSION>; -o Output.cap
Answer: D
NEW QUESTION # 31
How would you check the connection status of a gateway to the Log server?
- A. run netstat -anp I grep :18187 in CLISH on Log server
- B. run netstat -anp I grep :257 in CLISH on Log server
- C. run netstat -anp I grep :257 in expert mode on Log server
- D. run netstat -anp I grep :18187 in expert mode on Log server
Answer: C
NEW QUESTION # 32
How many different types of Service Requests exist?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 33
You have just acquired new licenses for your Check Point security Gateway. You need to attach the new license.
What is the object in the Security Console where you can attach the license for a software blade?
- A. Hardware Blade
- B. Security Blade
- C. Software Container
- D. Software Blade
Answer: C
NEW QUESTION # 34
When running the cplic command what argument is used to show the Signature key?
- A. -y all
- B. -S
- C. -x
- D. -m
Answer: C
NEW QUESTION # 35
......
156-581 Exam Questions Get Updated [2023] with Correct Answers: https://www.test4engine.com/156-581_exam-latest-braindumps.html
Free CheckPoint 156-581 Test Practice Test Questions Exam Dumps: https://drive.google.com/open?id=1BxC_8Se7x_kpZmjuYWLIMu2lfiNmdJ_g