[2021] Pass VMware 2V0-41.20 Test Practice Test Questions Exam Dumps
Verified 2V0-41.20 dumps Q&As - 2V0-41.20 dumps with Correct Answers
NEW QUESTION 22
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,D
NEW QUESTION 23
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
NEW QUESTION 24
Where are Distributed Firewall logs containing access decisions stored?
- A. Hypervisor transport node
- B. NSX API
- C. NSX Manager
- D. NSX Edge
Answer: A
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A
NEW QUESTION 25
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- C. vrf 3
- D. vrf 4
- E. vrf 1
- F. sa-nsxedge-01(tier0_dr)> get bgp neighbor
Answer: B,C
NEW QUESTION 26
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- B. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- C. vrf 3
- D. vrf 4
- E. vrf 1
- F. sa-nsxedge-01(tier0_dr)> get bgp neighbor
Answer: B,C
NEW QUESTION 27
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)
- A. Virtual Routing and Forwarding (VRF)
- B. Virtual Extensible Local Area Network (VXLAN)
- C. Open Shortest Path First (OSPF)
- D. Multiprotocol Border Gateway Protocol (MP-BGP)
- E. Multiprotocol Label Switching (MPLS)
Answer: A,B
NEW QUESTION 28
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh start <NSX-Manager-ID>
- B. virsh poweron <nsx-manager-name>
- C. virsh start <NSX-Manager-Name>
- D. virsh poweron <nsx-manager-ID>
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 29
An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?
- A. Layer 2 Gateway
- B. Tier-1 Gateway
- C. Tier-0 Gateway
- D. Edge Services Gateway
Answer: C
NEW QUESTION 30
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast is supported in ESXi and KVM transport nodes.
- B. Tier-0 gateways can be the Rendezvous Point.
- C. IGMP Snooping is used to populate multicast forwarding tables.
- D. An Edge can be the Rendezvous Point.
- E. Multicast routing is implemented with PIM Sparse-Mode.
Answer: C,E
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 31
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. set support-bundle file vcpnv.tgz
- B. esxcli system syslog config logger set --id=nsxmanager
- C. vm-support
- D. get support-bundle file vcpnv.tgz
Answer: D
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 32
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get host-switch <Host-Switch-Name> tunnels
- B. get host-switch <Host-Switch-Name> tunnel status
- C. get transport-node tunnel state
- D. get transport-node tunnel status
Answer: A
NEW QUESTION 33
Which three services are compatible with VRF Lite? (Choose three.)
- A. Load Balancer
- B. VPN
- C. NAT
- D. Intrusion Detection
- E. DHCP
Answer: A,B,C
NEW QUESTION 34
Which three can an administrator define in a transport node profile? (Choose three.)
- A. Uplink Profile
- B. Segment Profile
- C. Logical Router
- D. N-VDS switch configuration
- E. VDS switch configuration
- F. Segment
Answer: A,D,E
NEW QUESTION 35
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. Downlink interface
- B. Loopback Router Port
- C. Service interface
- D. VLAN Uplink
Answer: C
Explanation:
Explanation
"The service interface is a special-purpose port to enable services for mainly VLAN-based networks.
North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink"
NEW QUESTION 36
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?
- A. Centralize partner SVMs in a service cluster.
- B. Create a secondary vNIC on each quest VM for SVM communication.
- C. Add partner SVMs to an edge cluster.
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster." - D. Place a partner SVM on each compute cluster node.
Answer: D
NEW QUESTION 37
Which component does the hyperbus interface (vmk50) provide network connectivity to?
- A. virtual machines running in the same segment
- B. virtual machines and containers running across transport nodes
- C. containers running on ESXi/KVM transport nodes
- D. virtual machines running on the same hypervisor
Answer: C
NEW QUESTION 38
What are two supported N-VDS modes? (Choose two.)
- A. DPDK Datapath
- B. Secure Datapath
- C. Overlay Datapath
- D. Enhanced Datapath
- E. Standard Datapath
Answer: D,E
NEW QUESTION 39
Which tool could be used to configure BGP on a Tier-0 Gateway?
- A. ESX CLI
- B. PowerShell
- C. NSX CLI
- D. API
Answer: C
NEW QUESTION 40
......
Professional VMware NSX-T Data Center 2V0-41.20 Certification Path
Before applying for Professional VMware NSX-T Data Center 2V0-41.20 Certification, applicants are required to have at least 6 months of experience with Linux and KVM. Another 1 year experience with VMware vSphere and its command line is required as an official prerequisite for this exam. However, the recommended knowledge and experience required is discussed in detail in the “Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam” section of this document. Kindly refer to this section for more information.
2V0-41.20 certification guide Q&A from Training Expert Test4Engine: https://www.test4engine.com/2V0-41.20_exam-latest-braindumps.html
The Best VCP-NV Study Guide for the 2V0-41.20 Exam: https://drive.google.com/open?id=1eEcljA_8L7yXPnHoUks-eq4jOyMyNhoG