[Jan-2023] Download Real VMware 2V0-41.20 Exam Dumps Test Engine Exam Questions
New 2V0-41.20 exam dumps Use Updated VMware Exam
NEW QUESTION 54
Which statement Is true regarding the audit user account? (Choose two.)
- A. The audit user is disabled by default and must be enabled to log in to the NSX Manager.
- B. The administrator must run the set audit user password <password> command.
- C. The admin user must set the password for the audit account to log in to NSX Manager.
- D. The audit user has read-write access to the NSX Manager.
- E. The administrator must run the set user audit password <password> command.
Answer: C,E
NEW QUESTION 55
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can have a maximum of 8 edge nodes
- B. must have only active-active edge nodes
- C. can contain multiple types of edge nodes (VM or bare metal)
- D. can have a maximum of 10 edge nodes
- E. must contain only one type of edge nodes (VM or bare metal)
Answer: C,D
NEW QUESTION 56
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)
- A. Service Registration
- B. Service Introspection
- C. Service Consumption
- D. Service Insertion
- E. Service Deployment
Answer: A,C,E
Explanation:
Use these steps to configure north-south and east-west Network Introspection:
1. Service Registration: Service registration makes a service available in the catalog.
2. Service Deployment: Deploy an instance of a registered service.
3. Service Consumption: Use services in a service chain and redirect traffic.
Taken from NSX-T ICM 3.0 Lecture Manual.
NEW QUESTION 57
What are two supported N-VDS modes? (Choose two.)
- A. DPDK Datapath
- B. Secure Datapath
- C. Overlay Datapath
- D. Enhanced Datapath
- E. Standard Datapath
Answer: D,E
Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html
NEW QUESTION 58
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image.
Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?
- A. VMXNET3
- B. Flexible
- C. e1000
- D. VMXNET2
Answer: A
NEW QUESTION 59
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
- A. get logical-switch arp-table <vni>
- B. get logical-switch <vni> arp-table
- C. get logical-switch arp-table <logical-switch-uuid>
- D. get logical-switch <logical-switch-uuid> arp-table
- E. get logical-switch arp-table
Answer: B,D
NEW QUESTION 60
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)
- A. Destination NAT
- B. Reflexive NAT
- C. 1:1 NAT
- D. Port NAT
- E. Source NAT
Answer: A,E
NEW QUESTION 61
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. IGMP Snooping is used to populate multicast forwarding tables.
- B. An Edge can be the Rendezvous Point.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf - C. Tier-0 gateways can be the Rendezvous Point.
- D. Multicast is supported in ESXi and KVM transport nodes.
- E. Multicast routing is implemented with PIM Sparse-Mode.
Answer: A,E
NEW QUESTION 62
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
- A. set cli-timeout 1
- B. set cli-timeout disabled
- C. set cli-timeout enabled
- D. set cli-timeout 0
Answer: D
Explanation:
Explanation
"
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/
NEW QUESTION 63
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF. - B. BGP Neighbors
- C. Route Aggregation
- D. Route Distribution
- E. Graceful Restart
Answer: B,C
NEW QUESTION 64
When a stateful service is enabled for the first time on a Tier-0 Gateway, what happens on the NSX Edge node?
- A. DR is instantiated and automatically connected with SR.
- B. SR is instantiated and automatically connected with DR.
- C. SR and DR is instantiated but requires manual connection.
- D. SR and DR doesn't need to be connected to provide any stateful services.
Answer: B
NEW QUESTION 65
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?
- A. Centralize partner SVMs in a service cluster.
- B. Place a partner SVM on each compute cluster node.
- C. Create a secondary vNIC on each quest VM for SVM communication.
- D. Add partner SVMs to an edge cluster.
Answer: C
NEW QUESTION 66
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service nsx-manager logging-level debug
- C. set service manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: C
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 67
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)
- A. Create an IPsec service.
- B. Configure a distributed firewall policy.
- C. Configure an IPsec session.
- D. Add a local endpoint.
- E. Add a logical switch.
Answer: A,C,D
NEW QUESTION 68
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. SPAN mirrors
- B. Traceflow
- C. Port Mirroring
- D. IPFIX
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213)
Answer: B
NEW QUESTION 69
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service manager log-level debug
- B. set service nsx-manager logging-level debug
- C. set service manager logging-level debug
- D. set service nsx-manager log-level debug
Answer: C
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html
NEW QUESTION 70
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. FABRIC
- C. SYSTEM
- D. GROUPING
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 71
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi
transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. IPFIX
- C. Port Mirroring
- D. Switch Visualization
Answer: D
NEW QUESTION 72
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service manager logging-level debug
- C. set service nsx-manager log-level debug
- D. set service manager log-level debug
Answer: D
NEW QUESTION 73
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. get timezone
- B. set ntp-server
- C. set timezone
- D. set time-server
Answer: B
NEW QUESTION 74
Which CLI command shows syslog on NSX Manager?
- A. show log manager follow
- B. /var/log/sysloq/syslog.log
- C. get log-file auth.log
- D. get log-file syslog
Answer: D
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E
NEW QUESTION 75
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?
- A. Activity Monitoring
- B. IPFIX
- C. Port Mirroring
- D. Switch Visualization
Answer: D
NEW QUESTION 76
......
Pass Your 2V0-41.20 Dumps as PDF Updated on 2023 With 95 Questions: https://www.test4engine.com/2V0-41.20_exam-latest-braindumps.html
Verified 2V0-41.20 Dumps Q&As - 2V0-41.20 Test Engine with Correct Answers: https://drive.google.com/open?id=16QppGdS9k-w0bF6Pz4IvRIQ4oepAcKCz