350-601 Practice Cisco Verified Answers - Pass Your Exams For Sure! [2024]
Valid Way To Pass CCNP Data Center's 350-601 Exam
NEW QUESTION # 139
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
10.10.32.121/29 ,
10.10.32.122,
point-to-point ,
sparse-mode
NEW QUESTION # 140
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 141
Which product includes prebuilt templates that are available to be used to customize fabric deployments?
- A. Cisco ACI
- B. Cisco Tetration
- C. Cisco UCS Manager
- D. Cisco Data Center Network Manager
Answer: D
Explanation:
Section: Storage Network
NEW QUESTION # 142
An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment. Which two roles can be used to configure LAN Connectivity policies? (Choose two.)
- A. operations
- B. enable
- C. network-admin
- D. admin
- E. server-profile
Answer: C,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-4/ UCSM_GUI_Configuration_Guide_1_4_chapter9.html
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucsm_privileges/3-2/UCSM-Privileges-3_2/ UCSM-Privileges-3_2_chapter_01.html
NEW QUESTION # 143
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error message. Which method can be used before the application profile can be configured?
- A. POST to aaaRefresh
- B. POST to aaaLogout
- C. POST to aaaLogin
- D. GET to aaaListDomains
Answer: C
NEW QUESTION # 144
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Answer:
Explanation:
NEW QUESTION # 145
An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional, the router must be the active master. Which set of commands must be used to implement the scenario?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
NEW QUESTION # 146
A connect network engineer connects the CAN interface of a server to a switch. The switch must bring down all the vlans on the interface that are not enabled for FCoE, but the Vlans that are enabled for FCoE should continue to carry SAN traffic without interruption. Which configuration should be applied to the switch to achieve this objective?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
NEW QUESTION # 147
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>
NEW QUESTION # 148
Refer to the exhibit.
Why does the python code for Cisco NX-API print error message?
- A. The "type" is wrong in the header of the request and should be "cli_ conf".
- B. NX-API does not allow configuration for features via the requests module.
- C. The "type" is wrong is the body of the request and should be "cli_ conf".
- D. The JSON is not a supported format for the NX-API.
Answer: C
NEW QUESTION # 149
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?
- A. EPLD updates are nondisruptive to traffic flow
- B. EPLD updates are installed only via the Cisco DCNM GUI
- C. EPLD packages update hardware functionality on a device
- D. EPLD bundles are released separately from a Cisco MDS NX-OS release
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.htm
NEW QUESTION # 150
An engineer must recover the Cisco UCS system The full backup is available on a backup SCP server Which set of actions recovers the configuration of the Cisco UCS Manager?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 151
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. NX-API Sandbox
- B. NX-OS JSON-RPC
- C. Open NX-OS
- D. Guest Shell for NX-OS
Answer: A
Explanation:
Explanation
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox
NEW QUESTION # 152
A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?
- A. Adapter
- B. I/O module
- C. BIOS
- D. Cisco IMC
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/
https://www.youtube.com/watch?v=g-4OgYigvRI
NEW QUESTION # 153
The Cisco Nexus switch Generic Online Diagnostics policy for a PortLoopback test requires 10 consecutive failures to error disable the port. The customer wants to change it to 5 consecutive failures. Which configuration applies the changes for module 1 only?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: A
Explanation:
"mod all" is incorrect. "mod 1test" is incorrect. "publish event" is incorrect.
"mod 1 test" is correct. It is with "policy-default".
NEW QUESTION # 154
An engineer must configure HTTPS secure management for Cisco UCS Manager using a key ring named kr2016 and a key size of 1024 bits. The environment consists of a primary fabric interconnect named UCS-A and a secondary fabric interconnect named UCS-B. Which command sequence must be used to accomplish this goal?
- A. Option B
- B. Option D
- C. Option C
- D. Option A
Answer: A
Explanation:
Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_
NEW QUESTION # 155
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Answer:
Explanation:
Explanation
Graphical user interface Description automatically generated with low confidence
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin- Management/3-1/ b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/security/ cisco_mds9000_security_config_guide_8x/configuring_users_and_common_roles.html#con_1422305
NEW QUESTION # 156
Which communication method does NFS use for requests between servers and clients?
- A. XDR
- B. SMB
- C. PRC
- D. SSC
Answer: C
Explanation:
https://www-uxsup.csx.cam.ac.uk/pub/doc/redhat/WS2.1/rhl-rg-en-7.2/ch-nfs.html
NEW QUESTION # 157
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Interval
- B. Change Count
- C. No Change Interval
- D. History Count
Answer: D
NEW QUESTION # 158
Which product includes prebuilt templates that can be used to customize fabric deployments?
- A. Cisco ACI
- B. Cisco Tetration
- C. Cisco UCS Manger
- D. Cisco data Center Network Manger
Answer: D
NEW QUESTION # 159
Refer to the exhibit.
What be connected to clear the HA NOT READY status?
- A. Layer 1-Layer 2 ports
- B. server chassis
- C. management ports
- D. network uplinks
Answer: B
NEW QUESTION # 160
An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus
5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement Which set of commands configures the SPAN session?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: A
Explanation:
Explanation
Answer is not confirmed until having exact snap shots of the question. I believe there is something wrong.
NEW QUESTION # 161
An engineer must generate a checkpoint of the running configuration on a Cisco Nexus Switch. The checkpoint file name must be called "before_maintenance' and should be used for recovering the switch to its pre-maintenance state. The rollback of the checkpoint to running configuration should only occur if no errors occur. Which two configuration commands must be used to meet these requirements? (Choose two.)
- A. rollback running-config file before_maintenance atomic
- B. rollback checkpoint file before_maintenance stop-at-first-failure
- C. rollback running-config checkpoint before_maintenance
- D. checkpoint before_maintenance
- E. checkpoint file before_maintenance
Answer: A,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/command/reference/security/n5k-sec-c rollback checkpoint is invalid command. Rollback should be to running configuration, not a checkpoint rollback can be selected by a name or file name. the difference between them is using the "file" keyword.
NEW QUESTION # 162
......
Cisco 350-601 Pre-Exam Practice Tests | Test4Engine: https://www.test4engine.com/350-601_exam-latest-braindumps.html
350-601 practice test questions, answers, explanations: https://drive.google.com/open?id=1RzhjosSdY1XO7mqQ-LUcn53YC4LJfv1j