[Q39-Q63] Get 100% Passing Success With True 350-601 Exam! [Oct-2021]

Share

Get 100% Passing Success With True 350-601 Exam! [Oct-2021] 

Cisco 350-601 PDF Questions - Exceptional Practice To Implementing and Operating Cisco Data Center Core Technologies

NEW QUESTION 39
Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

  • A. N7K-1 preempts N7K-2 as the STP root.
  • B. N7K-2 appears as the STP root.
  • C. N7K-1 and N7K-2 appear as a single STP root.
  • D. N7K-1 appears as the STP root.

Answer: C

 

NEW QUESTION 40
Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

  • A. N7K-1 preempts N7K-2 as the STP root.
  • B. N7K-2 appears as the STP root.
  • C. N7K-1 and N7K-2 appear as a single STP root.
  • D. N7K-1 appears as the STP root.

Answer: C

 

NEW QUESTION 41
An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional the router must be the active master. Which set of commands must be used to implement the scenario?

  • A. Option D
  • B. Option C
  • C. Option A
  • D. Option B

Answer: B

 

NEW QUESTION 42
Refer to Exhibit:

An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: A

 

NEW QUESTION 43
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.

Answer:

Explanation:

 

NEW QUESTION 44
Due to new regulatory requirements from a third party, organization ABC must enable two-factor authentication for the Cisco UCS environment. The requirement is also to provide redundancy if the authentication server goes offline. Which three authentication components must be enabled to meet this requirement? (Choose three.)

  • A. provider group
  • B. authentication domain
  • C. TACACS+
  • D. LDAP
  • E. local

Answer: A,B,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Managem

 

NEW QUESTION 45

Refer to the exhibit. An engineer needs to implement streaming telemetry on a cisco MDS 9000 series switch.
The requirement is for the show command data to be collected every 30 seconds and sent to receivers. Which command must be added to the configuration meet this requirement?

  • A. Snsr-grp 200 sample-interval 30000
  • B. Snsr-grp 200 sample-interval 30
  • C. Sensor-grp 200 sample-period 30
  • D. Sensor-grp 200 sample-period 30000

Answer: C

 

NEW QUESTION 46
Which feature must be enabled to support the use of JSON and XML encoding when a Cisco Nexus 7000 series switch is deployed?

  • A. LLDP
  • B. NX-API
  • C. Open Agent Container
  • D. Bash shell

Answer: B

 

NEW QUESTION 47
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?

  • A. The zone merge stops.
  • B. The upgrade stops
  • C. The zone merge pauses until the upgrade completes
  • D. The zone merge executes and then the upgrade completes.

Answer: B

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html

 

NEW QUESTION 48
An engineer must configure a Nexus 7000 series switch for HSRP on VLAN 100. When fully functional the router must be the active master. Which set of commands must be used to implement the scenario?

  • A. Option D
  • B. Option C
  • C. Option A
  • D. Option B

Answer: B

 

NEW QUESTION 49
Refer to the exhibit.

An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?

  • A. Mode2 is enabled by default.
  • B. Compression is performed by using software.
  • C. The switch attempts to make two TCP connections
  • D. Compression is performed by using hardware

Answer: D

 

NEW QUESTION 50
An engineer must suggest a deployment model for a newly developed application. The engineer has a small starting budget and lacks technical knowledge and infrastructure to implement store, operating system and database services to support the application deployment. The engineer also needs usage data related to the service and the ability to elastically scale the deployment as customer demands grow. Which two models must be used to meet the requirements? (Choose two)

  • A. platform as a service
  • B. public cloud
  • C. infrastructure as a service
  • D. software as a service
  • E. private cloud

Answer: B,C

 

NEW QUESTION 51
Refer to the exhibit.

What is the reason the system-fm-vrrp checkpoint was created?

  • A. The VRRP service restarted and the checkpoint was automatically created.
  • B. The VRRP-enable feature has been disabled.
  • C. The VRRP process crashed and the checkpoint was automatically created.
  • D. The network administrator manually created it.

Answer: B

 

NEW QUESTION 52
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: B

 

NEW QUESTION 53
Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

  • A. CIMC
  • B. PSU
  • C. third-party
  • D. system
  • E. BIOS

Answer: A,E

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html

 

NEW QUESTION 54
Refer to the exhibit.

Which result of running the command is true?

  • A. Multicast traffic forwarding is suspended.
  • B. MRIB is flushed
  • C. PIM join messages are suspended.
  • D. The PIM database is deleted.

Answer: D

 

NEW QUESTION 55
An engineer is implementing the Cisco ACI fabric and must create two different vPCs from leaf switches A and B.
The vPCs are deployed as follows:
* vPC 1 encompasses ports Eth 1 /1 on leaf A and B and connects to server 1.
* vPC 2 encompasses port Eth1/2 on leaf A and B and connects to server 2.
A leaf switch profile listing leaves A and B is already configured Which ACI object must be created to meet these requirements?

  • A. two vPC interface policy groups
  • B. one access port interface policy group
  • C. one vPC interface policy group
  • D. two PortChannel interface policy groups

Answer: A

 

NEW QUESTION 56
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.

Answer:

Explanation:

Explanation
prevent unauthorized - fabric binding.
Uses the exchange fabric membership- fabric binding
Can be distributed - port security
Allows a preconfigured - port security

 

NEW QUESTION 57
What are two capabilities of the Cisco Network Assurance Engine? (Choose two.)

  • A. It verifies the speed of network packet flows by using telemetry.
  • B. It validates that devices comply with network security policies.
  • C. It ensures that network performance meets an SLA.
  • D. It predicts the impact of changes to the network.
  • E. It predicts the network load on a data center.

Answer: B,D

 

NEW QUESTION 58
Which feature must be enabled to support the use of JSON and XML encodings when a Cisco Nexus 7000 Series Switch is deployed?

  • A. LLDP
  • B. NX-API
  • C. Open Agent Container
  • D. Bash shell

Answer: B

Explanation:
Section: Automation

 

NEW QUESTION 59
Which two authentication types does Cisco UCS Manager support when configuration authentication?
(Choose two.)

  • A. LDAP
  • B. Kerberos
  • C. 802.1X
  • D. PAM
  • E. local

Answer: A,E

 

NEW QUESTION 60
Refer to the exhibit.

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: B

 

NEW QUESTION 61
Refer to the exhibit.

Which type of backup is required to restore a Cisco UCS configuration?

  • A. logical configuration
  • B. all configuration
  • C. system configuration
  • D. full state

Answer: D

 

NEW QUESTION 62
A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of "warning" and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?

  • A. Option D
  • B. Option B
  • C. Option A
  • D. Option C

Answer: B

Explanation:

 

NEW QUESTION 63
......

350-601 dumps - Test4Engine - 100% Passing Guarantee: https://www.test4engine.com/350-601_exam-latest-braindumps.html

Fast, Hands-On 350-601 exam: https://drive.google.com/open?id=1OiS4Q_4YNWlfIUr2dE_8SEW3XqgT76t6