Fortinet New 2021 NSE7_EFW-6.4 Test Tutorial (Updated 104 Questions)
NSE7_EFW-6.4 Exam Questions Dumps, Selling Fortinet Products
Average Salary of Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 - Enterprise Firewall 6.4 Exam Certified Professional
It is important to understand the kind of salary you can expect from this kind of career path while looking for advancement and progress in the world of field engineers and Fortinet NSE certification. Salaries at Fortinet are expected to range from $65,000 to about $105,000, and the average salary is about $85,000 for a certified NSE engineer.
Of course, by ensuring that you do more to help you earn, and increasing your skills and qualifications, you can focus on trying to develop this. You can also go to the Field Engineer and see if they can help you increase your prospective earnings and obtain better positions.
NEW QUESTION 20
Examine thefollowing partial outputs from two routing debug commands; then answer the question below:
Why the default route using port2 is not displayed in the output of the second command?
- A. It has a higher distance than the default route using port1.
- B. It hasa higher priority than the default route using port1.
- C. It is disabled in the FortiGate configuration.
- D. It has a lower priority than the default route using port1.
Answer: A
Explanation:
Explanation
http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103
NEW QUESTION 21
An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)
- A. OSPF interface cost.
- B. Router ID.
- C. Interface subnet mask.
- D. OSPF interface MTU.
- E. OSPF interface area.
Answer: C,D,E
NEW QUESTION 22
Examine the output ofthe 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statement can explain why the state of the remote BGP peer 10.200.3.1 is Connect?
- A. The TCP session for the BGP connection to 10.200.3.1 is down.
- B. The local peer is receiving the BGP keepalives from the remote peer but it has not received the OpenConfirm yet.
- C. The local peer has received the BGP prefixed from the remote peer.
- D. The local peer is receiving the BGP keepalives from the remote peer but it has not received any BGP prefix yet.
Answer: A
Explanation:
Explanation
http://www.ciscopress.com/articles/article.asp?p=2756480
NEW QUESTION 23
View the exhibit, which contains a partial output of an IKE real-time debug, and then answer the question below.
Based on the debug output, which phase-1 setting is enabled in the configuration of this VPN?
- A. auto-discovery-shortcut
- B. auto-discovery-forwarder
- C. auto-discovery-sender
- D. auto-discovery-receiver
Answer: B
NEW QUESTION 24
Which two statements about FortiManager is true when it is deployed as alocal FDS? (Choose two.)
- A. It can be configured as an update server, or a rating server, but not both.
- B. It provides VM license validation services.
- C. It caches available firmware updates for unmanaged devices.
- D. It supports rating requests from both managed and unmanaged devices.
Answer: B,C
NEW QUESTION 25
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher distance than the default route using port1.
- B. It has a lowerpriority value than the default route using port1.
- C. It is disabled in the FortiGate configuration.
- D. It has a higher priority value than the default route using port1.
Answer: A
NEW QUESTION 26
View the central management configuration shown in the exhibit, and then answer the question below.
Which serverwill FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.240
- B. 10.0.1.244
- C. One of the public FortiGuard distribution servers
- D. 10.0.1.242
Answer: C
NEW QUESTION 27
Examine the partial output fromtwo web filter debug commands; then answer the question below:
Based on the above outputs, which is the FortiGuard web filter category for the web site www.fgt99.com?
- A. Business.
- B. Finance and banking
- C. General organization.
- D. Information technology.
Answer: A
NEW QUESTION 28
View the following FortiGate configuration.
All traffic to theInternet currently egresses from port1. The exhibit shows partial session information for Internet traffic from a user on the internal network:
If the priority on route ID 1 were changed from 5 to 20, what would happen to traffic matching that user's session?
- A. The session would remain in the session table, and its traffic would still egress from port1.
- B. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
- C. The session would be deleted, so the client would need to start a new session.
- D. The session would remain in thesession table, and its traffic would start to egress from port2.
Answer: A
Explanation:
Explanation
http://kb.fortinet.com/kb/documentLink.do?externalID=FD40943
NEW QUESTION 29
Examine the output from the BGP real time debugshown in the exhibit, then the answer the question below:
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peers have successfully interchangedOpenandKeepalivemessages.
- B. The state of the remote BGP peer isOpenConfirm.
- C. Local BGP peer received a prefix fora default route.
- D. The state of the remote BGP peer will go toConnectafter it confirms the received prefixes.
Answer: A,C
NEW QUESTION 30
Examine the partial output from the IKE real time debug shown in the exhibit; then answer the question below.
Why didn't the tunnel come up?
- A. IKE mode configuration is not enabled in the remote IPsec gateway.
- B. Theremote gateway's Phase-2 configuration does not match the local gateway's phase-2 configuration.
- C. The remote gateway's Phase-1 configuration does not match the local gateway's phase-1 configuration.
- D. One IPsec gateway is using main mode, while theother IPsec gateway is using aggressive mode.
Answer: C
NEW QUESTION 31
What global configuration setting changes the behavior for content-inspected traffic while FortiGate is in system conserve mode?
- A. utm-failopen
- B. ips-failopen
- C. av-failopen
- D. mem-failopen
Answer: C
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-security-profiles-54/Other_Profile_Consideration
NEW QUESTION 32
Which of the following statements are true regardingthe SIP session helper and the SIP application layer gateway (ALG)? (Choose three.)
- A. SIP ALG supports SIP HA failover; SIP helper does not.
- B. SIP helper supports SIP over TCP and UDP; SIP ALG supports only SIP over UDP.
- C. SIP ALG can create expected sessions for media traffic; SIP helper does not.
- D. SIP ALG supports SIP over IPv6; SIP helper does not.
- E. SIP session helper runs in the kernel; SIP ALG runs as a user space process.
Answer: A,C,D
NEW QUESTION 33
View the IPS exit log, and then answer the question below.
# diagnose test application ipsmonitor 3
ipsengine exit log"
pid = 93 (cfg), duration = 5605322 (s) at Wed Apr19 09:57:26 2017
code = 11, reason: manual
What is the status of IPS on this FortiGate?
- A. IPS engine memory consumption has exceeded the model-specific predefined value.
- B. There are communication problems between theIPS engine and the management database.
- C. IPS daemon experienced a crash.
- D. All IPS-related features have been disabled in FortiGate's configuration.
Answer: D
Explanation:
Explanation
The command diagnose test application ipsmonitor includes many options that are useful for troubleshooting purposes.Option 3 displays the log entries generated every time an IPS engine process stopped. There are various reasons why these logs are generated:Manual: Because of the configuration, IPS no longer needs to run (that is, all IPS-releated features have been disabled)
NEW QUESTION 34
A corporate network allows Internet Access to FSSO users only. The FSSO user student does not have Internet access after successfully logged into the Windows AD network. The output of the 'diagnose debug authd fsso list' command does not show student as an active FSSO user. Other FSSO users can access the Internet without problems. What should the administrator check? (Choose two.)
- A. The student workstation's IP subnet must be listed in the CA's trusted list.
- B. At least one of thestudent's user groups must be allowed by a FortiGate firewall policy.
- C. The user student must not be listed in the CA's ignore user list.
- D. The user student must belong to one or more of the monitored user groups.
Answer: B,C
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD38828
NEW QUESTION 35
Examine the following partial outputs from two routing debug commands; then answer the question below.
# get router info kernel
tab=254 vf=0 scope=0type=1 proto=11 prio=00.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.1.254 dev=2(port1) tab=254 vf=0 scope=0type=1 proto=11 prio=10 0.0.0.0/0.0.0.0/0->0.0.0.0/0 pref=0.0.0.0 gwy=10.200.2.254 dev=3(port2) tab=254 vf=0 scope=253type=1 proto=2 prio=0 0.0.0.0/0.0.0.0/.->10.0.1.0/24 pref=10.0.1.254 gwy=0.0.0.0 dev=4(port3)
# get router info routing-table all s*0.0.0.0/0 [10/0] via 10.200.1.254, portl [10/0] via 10.200.2.254, port2,
[10/0] dO.0.1.0/24 is directly connected, port3 dO.200.1.0/24 is directly connected, portl d0.200.2.0/24 is directly connected, port2 Which outbound interface or interfaces will be used by this FortiGate to route web traffic from internal users to the Internet?
- A. Both portl and port2.
- B. port3.
- C. port2.
- D. port!
Answer: C
NEW QUESTION 36
View the exhibit, which contains the output of diagnose sys session list, and then answer the question below.
If the HA ID forthe primary unit is zero (0), which statement is correct regarding the output?
- A. The inspection of this session has been offloaded to the slave unit.
- B. This session cannot be synced with the slave unit.
- C. This session is for HA heartbeat traffic.
- D. This session is synced with the slave unit.
Answer: D
NEW QUESTION 37
An administrator has configured the following CLIscript on FortiManager, which failed to apply any changes to the managed device after being executed.
Why didn't the script make any changes to the managed device?
- A. Static routes can only be added using TCL scripts.
- B. Incomplete commands are ignored in CLI scripts.
- C. CLI scripts will add objectsonly if they are referenced by policies.
- D. Commands that start with the # sign are not executed.
Answer: D
Explanation:
Explanation
https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scr A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.
NEW QUESTION 38
Refer to the exhibit, which contains the output of a BGP debug command.
Which statement about the exhibit is true?
- A. The local router BGP state is OpenConfirm with the 10.127.0.75 peer.
- B. The local router has not established a TCP session with 100.64.3.1.
- C. The local router has received a total of three BGPprefixes from all peers.
- D. Since the counters were last reset, the 10.200.3.1 peer has never been down.
Answer: B
NEW QUESTION 39
Refer to the exhibit, which contains the output of diagnose sys session list.
If the HA ID for the primary unit is zero (0), which statement about the output is true?
- A. The inspection of this session has been offloaded to the slave unit.
- B. The master unit is processing this traffic.
- C. This session cannot be synced with the slave unit.
- D. This session is for HA heartbeat traffic.
Answer: B
NEW QUESTION 40
View the exhibit, which contains theoutput of get sys ha status, and then answer the question below.
Which statements are correct regarding the output? (Choose two.)
- A. port 7 is used the HA heartbeat on all devices in the cluster.
- B. Master is selected because it is the only device in the cluster.
- C. The slave configuration is not synchronized with the master.
- D. The HA management IP is 169.254.0.2.
Answer: A,C
NEW QUESTION 41
Examine the output of the 'get router info bgp summary' command shown in the exhibit; then answer the question below.
Which statements are true regarding the output in the exhibit? (Choose two.)
- A. BGP peer 10.200.3.1 has never beendown since the BGP counters were cleared.
- B. BGP state of the peer 10.125.0.60 is Established.
- C. Local BGP peer has not received an OpenConfirm from 10.200.3.1.
- D. The local BGP peer has received a total of 3 BGP prefixes.
Answer: B,C
NEW QUESTION 42
The logs in a FSSO collector agent (CA) are showing the following error:
failed to connect to registry: PIKA1026 (192.168.12.232)
What can be the reason for this error?
- A. The remote registry service is not running in the workstation 192.168.12.232.
- B. The CA cannot reach the FortiGate with the IP address192.168.12.232.
- C. The CA cannot resolve the name of the workstation.
- D. The FortiGate cannot resolve the name of the workstation.
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=FD30548
NEW QUESTION 43
Examine the IPsec configuration shown in the exhibit; then answer the question below.
An administrator wants to monitor the VPN by enabling theIKE real time debug using these commands:
diagnose vpn ike log-filter src-addr4 10.0.10.1
diagnose debug application ike -1
diagnose debug enable
The VPN is currently up, there is no traffic crossing the tunnel and DPD packets are beinginterchanged between both IPsec gateways. However, the IKE real time debug does NOT show any output. Why isn't there any output?
- A. The log-filter setting is set incorrectly. The VPN's traffic does not match this filter.
- B. The IKE real time debug shows error messages only. If it does not provide any output, it indicates that the tunnel is operating normally.
- C. The IKE real time debug shows the phase 1 negotiation only. For information after that, the administrator must use the IPsec real time debug instead: diagnose debug application ipsec -1.
- D. The IKE real time shows the phases 1 and 2 negotiations only. It does not show any more output once the tunnel is up.
Answer: A
NEW QUESTION 44
......
NSE7_EFW-6.4 Cert Guide PDF 100% Cover Real Exam Questions: https://www.test4engine.com/NSE7_EFW-6.4_exam-latest-braindumps.html
Pass NSE7_EFW-6.4 Review Guide, Reliable NSE7_EFW-6.4 Test Engine: https://drive.google.com/open?id=1bKpN9ZUd4qBw_ONi31s4jGUmkjurHPgB