Free JNCIS-SP JN0-362 Ultimate Study Guide (Updated 67 Questions)
Get to the Top with JN0-362 Practice Exam Questions
For more info visit:
NEW QUESTION 37
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
- A. The TLV attributes are type, length, and value.
- B. PDUs contain different TLVs.
- C. The TLV attributes are time. Length, and variable.
- D. TLVs contain different PDUs.
Answer: A,B
NEW QUESTION 38
Click the Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The last node in the path will pop the MPLS label.
- B. The LSP is protected with fast reroute.
- C. The LSP is protected with link protection.
- D. The last node in the path will not pop the MPLS label.
Answer: A,C
NEW QUESTION 39
Click the Exhibit button. The policy shown in the exhibit has been configured and installed on your router.
What is the result of applying this policy?
- A. The 172.18.1.0/24 network will be redistributed into OSPF as an external route.
- B. The 172.18.1.0/32 network will be redistributed into OSPF as an internal route.
- C. The 172.18.1.0/32 network will be redistributed into OSPF as an external route.
- D. The 172.18.1.0/24 network will be redistributed into OSPF as an internal route.
Answer: A
NEW QUESTION 40
What are two valid next-hop types that would be configured for a static route? (Choose two.)
- A. An IP address
- B. An egress interface name
- C. A MAC address
- D. An igress interface name
Answer: A,B
NEW QUESTION 41
Click the Exhibit button.
Referring to the exhibit, which statement about the IS-IS interface is true?
- A. The ge-0/0/0.0 interface will act as an L2 interface only
- B. The ge-0/0/0.0 interface will act as an L1/L2 interface
- C. The ge-0/0/0.0 interface will act as an L1 interface only
- D. The ge-0/0/0.0 interface will not be assigned to a level
Answer: B
NEW QUESTION 42
Which statement is true regarding default MPLS label handling?
- A. A router that pops a label from a label stack forwards a frame based on the underlying destination IP address.
- B. A router that pops a label from a label stack applies class of service based on the IP header to ToS bits.
- C. A router that pops a label from a label stack always pushes a new label on the packet
- D. A router that pops a label from a label stack forwards a frame based on the label that was popped.
Answer: A
NEW QUESTION 43
Router B is an OSPF router connected to both Area 0 and Area 2. Area 2 has been configured as a totally stubby area.Which three LSA types does Router B suppress from Area 2? (Choose Three.)
- A. ASBR Summary LSA
- B. Summary LSA
- C. Router LSA
- D. Network LSA
- E. External LSA
Answer: A,B,E
NEW QUESTION 44
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- B. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- C. The OSPF neighbor will be declared down if three BFD hello packets are missed
- D. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
Answer: A,C
Explanation:
Explanation
NEW QUESTION 45
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- B. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- C. The OSPF neighbor will be declared down if three BFD hello packets are missed
- D. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
Answer: A,C
NEW QUESTION 46
Click the Exhibit.
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)
- A. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.
- B. Set the GRE interface with a larger TTL value.
- C. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
- D. Remove the existing 192.168.2.0/30 static route.
Answer: C,D
NEW QUESTION 47
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. multipath
- B. type external
- C. type internal
- D. export <policy name>
Answer: C
NEW QUESTION 48
By default, which three criteria are used by the Junos load-balancing algorithm to determine a traffic flow? (Choose three.)
- A. destination address
- B. source port
- C. protocol
- D. destination port
- E. source address
Answer: A,C,E
NEW QUESTION 49
Click the exhibit.
In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)
- A. R3
- B. R1
- C. R2
- D. R4
Answer: B,C
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The MPLS LSP to the 192.168.0.2 peer is down
- B. The protocol next hop is not reachable
- C. The wrong BGP address family is enabled for the BGP session
- D. The route has yet to be verified
Answer: B
NEW QUESTION 51
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
- A. Communities
- B. Next Hop
- C. MED
- D. AS-Path
Answer: C
NEW QUESTION 52
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: D
NEW QUESTION 53
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes can successfully transmit simultaneously.
- B. Nodes use a step-up algorithm when collisions are detected.
- C. Nodes share a physical medium.
- D. It consists of a single broadcast domain.
Answer: C,D
NEW QUESTION 54
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. The second address is incomplete and not correct.
- C. The third address is not formatted correctly.
- D. All three addresses are the same.
Answer: A,D
NEW QUESTION 55
Which two statements are true when considering logical systems? (Choose two.)
- A. Logical systems share the master routing table and can create routing instances
- B. Logical systems do not support nonstop active routing
- C. Logical systems provide management separation by providing user access per logical system
- D. Logical tunnels cannot be used to connect logical systems
Answer: C,D
NEW QUESTION 56
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface ge-1/0/0.0 can only form a single adjacency
- B. Interface xe-0/0/0.0 can only form a single adjacency
- C. Interface ge-3/0/0.0 has a default metric of 10
- D. Interface xe-0/0/0.0 has a default metric of 10
Answer: C
NEW QUESTION 57
You notice that a route from internal BGP peer 192.168.1.1 is missing from the local route table.Which two commands would be used to help identify the source of the problem? (Choose two.)
- A. show route protocol bgp hidden
- B. show route receive-protocol bgp 192.168.1.1
- C. show route bgp
- D. show route advertising-protocol bgp 192.168.1.1
Answer: A,B
NEW QUESTION 58
You observe that VPN routes are hidden on your PE router Which situation accounts for these hidden routes?
- A. The protocol next-hop is not found in bgp I3vpn 0
- B. The protocol next-hop is not found in inet 2
- C. The protocol next-hop is not found in mpls 0
- D. The protocol next-hop is not found in inet.3
Answer: D
NEW QUESTION 59
......
Pass Juniper JN0-362 exam - questions - convert Tets Engine to PDF: https://www.test4engine.com/JN0-362_exam-latest-braindumps.html