JN0-362 Practice Test Questions Answers Updated 67 Questions
JN0-362 dumps & JNCIS-SP Sure Practice with 67 Questions
Certification Details: Juniper Networks Certified Internet Specialist - Service Provider
At the pinnacle of the Juniper Service Provider certification path lies this Juniper Networks Certified Internet Specialist - Service Provider certification. This certificate complements a student’s knowledge of the Juniper Networks technology at the Specialist level. It confirms your capability to manage routing and switching technologies and the relevant skills in configuring platforms alongside troubleshooting. Juniper demands that all candidates aiming for the JNCIS-SP designation must first complete the associate-level Juniper Networks Certified Internet Associate - Junos certificate.
NEW QUESTION 35
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The configuration is for an external BGP session
- B. The configuration is for an internal BGP session
- C. The local-address statement is not required for the BGP session to establish correctly
- D. The local-address statement is required for the BGP session to establish correctly
Answer: B,D
NEW QUESTION 36
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
- B. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- C. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
- D. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
Answer: A,D
NEW QUESTION 37
You have recently configured MSTP on two switches in your network to participate in the same MSTP region. You issue the show spanning-tree mstp configuration command on both switches and notice that the configuration digests do not match.
What does this mismatch indicate?
- A. You should ensure that the max-age and hello timers are equal on both switches.
- B. You should ensure that the MSTIs and their VLAN IDs are equal on both switches.
- C. Everything is functioning as expected because the configuration digests should not match.
- D. You should ensure that the bridge IDs and priority values are unique on both switches.
Answer: B
NEW QUESTION 38
Click the Exhibit button.
You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?
- A. stub area
- B. totally stubby area
- C. not-so-stubby area
- D. backbone area
Answer: A
NEW QUESTION 39
Click the Exhibit button.
Referring to the exhibit, if there is a connection failure between router1 and router2, how much time will pass before the devices declare the BFD session dead?
- A. 300 ms
- B. 600 ms
- C. 1200 ms
- D. 900 ms
Answer: D
NEW QUESTION 40
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?
- A. The peer's AS number is misconfigured
- B. The TCP session is not establishing
- C. The update messages contain an unsupported option
- D. The neighbor does not support IPv6
Answer: A
NEW QUESTION 41
Which three statements are true about GRES? (Choose three.)
- A. Interface information is preserved.
- B. Kernel information is preserved.
- C. GRES requires redundant REs.
- D. Control plane information is preserved.
- E. GRES requires only one RE.
Answer: A,B,C
NEW QUESTION 42
You notice that the RID of your router is being taken from the address of your management interface.
What could cause this scenario?
- A. A suitable loopback address was not configured on the router.
- B. The loopback address was not configured under [edit protocols ospf].
- C. The loopback address was configured under [edit routing-options].
- D. The loopback address was configured with a /32 address.
Answer: A
NEW QUESTION 43
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?
- A. Level 1 is disabled and Level 2 is enabled.
- B. Level 1 is enabled and Level 2 is enabled.
- C. Level 1 is disabled and Level 2 is disabled.
- D. Level 1 is enabled and Level 2 is disabled.
Answer: C
NEW QUESTION 44
Click the Exhibit.
Referring to the configuration in the exhibit, which statement is true?
- A. The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.
- B. The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route
192.168.5.0/24 to be active. - C. The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active.
- D. The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.
Answer: B
NEW QUESTION 45
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish. Referring to the exhibit, which statement correctly identifies the problem?
- A. Hello and dead timers are not matching between R1 and R2
- B. R2 has a wrong area configured
- C. R1 does not have a router ID defined
- D. R1 and R2 have the same router ID
Answer: D
NEW QUESTION 46
Click the Exhibit button.
You are troubleshooting a new BGP peering session which is not establishing. Referring to the exhibit, which statement is true?
- A. The peer's AS number is misconfigured
- B. The TCP session is not establishing
- C. The update messages contain an unsupported option
- D. The neighbor does not support IPv6
Answer: A
NEW QUESTION 47
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R1 is a backbone router
- B. R2 is an ABR
- C. R1 is an ABR
- D. R2 is an ASBR
Answer: B
NEW QUESTION 48
Referring to the exhibit, which firewall filter action(s) will be applied to incoming frames to ge-1/0/3?
- A. Frames will be counted initially by filterA and then counted by filterB.
- B. Frames will be counted by filterB only.
- C. Frames will be counted initially by filterB and then counted by filterA.
- D. Frames will be counted by filterA only.
Answer: A
NEW QUESTION 49
Click the Exhibit button.
Customer-1 wants the Service Provider to allow STP to operate normally on all ports but only allow the MX Series devices to manage the Layer 2 topology.
Referring to the exhibit, which feature needs to be implemented on all devices to accomplish this task?
- A. BPDU protection
- B. root protection
- C. loop protection
- D. MAC movement protection
Answer: C
NEW QUESTION 50
Click the exhibit.
In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)
- A. R3
- B. R1
- C. R2
- D. R4
Answer: B,C
NEW QUESTION 51
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- B. Routes from 10.2.2.2 are less preferred than the default local preference
- C. Routes from 10.3.3.3 are more preferred than the default local preference
- D. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
Answer: C
NEW QUESTION 52
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R3 will not participate in the election process
- B. R1 will not participate in the election process
- C. R4 will be the designated router
- D. R2 will be the designated router
Answer: A
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf- areas.html#id-example-controlling-ospf-designated-router-election
NEW QUESTION 53
Which two statements are correct about the BGP MED attribute? (Choose two.)
- A. BGP routes require the MED attribute be defined
- B. BGP uses the MED value when peering to two different upstream ASs
- C. BGP assumes the MED value to be 0, if not already defined
- D. BGP uses the MED value when peering to two or more connections to the same upstream AS
Answer: C,D
NEW QUESTION 54
What is the correct simplification of the 2001:0000:0000:0234F:0000:CBFF:5CA1:A001 IPv6 address?
- A. 2001:0:0:234F:0:CBFF:5CA1:A1
- B. 2001::234F:CBFF:5CA1:A001
- C. 2001::234F::CBFF:5CA1:A001
- D. 2001::234F:0 :CBFF:5CA1:A001
Answer: D
NEW QUESTION 55
You asked to deploy a large-scale IS-IS network with multiple areas.
In this scenario, which two statements are true? (Choose two.)
- A. The area IDs must be the same for Level1 routers to from an adjacency.
- B. Level1 routers can from an adjacency with any other Level 1 router.
- C. Level1 routers can from an adjacency with any other Level 2 router.
- D. The area IDs must be the same for Level 2 routers to from an adjacency.
Answer: A,B
NEW QUESTION 56
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The OSPF neighbor will be declared down if BFD hello packets are not received for 1.5 seconds
- B. The OSPF neighbor will be declared down if 500 BFD hello packets are missed
- C. The OSPF neighbor will be declared down if three BFD hello packets are missed
- D. The OSPF neighbor will be declared down if BFD hello packets are not received for 5 seconds
Answer: A,C
Explanation:
Explanation
NEW QUESTION 57
Which two statements are correct regarding TLVs in IS-IS? (Choose two.)
- A. The TLV attributes are type, length, and value.
- B. PDUs contain different TLVs.
- C. The TLV attributes are time. Length, and variable.
- D. TLVs contain different PDUs.
Answer: A,B
NEW QUESTION 58
......
New JN0-362 Exam Questions| Real JN0-362 Dumps: https://www.test4engine.com/JN0-362_exam-latest-braindumps.html