Latest [Oct 21, 2021] Cisco 300-425 Exam Practice Test To Gain Brilliante Result [Q44-Q63]

Share

Latest [Oct 21, 2021] Cisco 300-425 Exam Practice Test To Gain Brilliante Result

Take a Leap Forward in Your Career by Earning Cisco 300-425

NEW QUESTION 44
An engineer is performing a predictive wireless design for a medical treatment environment, which requires data and voice services. What is the minimum requirement for the design?

  • A. overlapping -72 dBm coverage from two access points
  • B. overlapping -67 dBm coverage from two access points
  • C. continuous -67 dBm coverage from one access point
  • D. continuous -72 dBm coverage from one access point

Answer: C

Explanation:
Explanation

So -67dBm covers both Data & Voice with a single AP

 

NEW QUESTION 45
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)

  • A. spirit level
  • B. tall tripod
  • C. goggles
  • D. access point
  • E. ladder
  • F. PoE battery

Answer: B,D,F

 

NEW QUESTION 46
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?

  • A. redundant controllers in the most restrictive regulatory domain
  • B. one controller per country code
  • C. one controller per continent
  • D. redundant controllers in the least restrictive regulatory domain

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/country_codes.html

 

NEW QUESTION 47
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

  • A. fewer antennas than laptops
  • B. lower data rates than laptops
  • C. no support for 802.11r
  • D. higher data rates than laptops
  • E. no support for 802.11ac

Answer: A,B

Explanation:

 

NEW QUESTION 48
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?

  • A. IP protocol 97
  • B. UDP port 97
  • C. UDP port 16666
  • D. TCP port 97

Answer: C

Explanation:

 

NEW QUESTION 49
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

  • A. up to 20 WLCs and 3000 APs
  • B. up to 20 WLCs and 1000 APs
  • C. up to 20 WLCs and 6000 APs
  • D. up to 20 WLCs and 4000 APs

Answer: C

 

NEW QUESTION 50
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?

  • A. voice design model
  • B. high-density design model
  • C. roaming design model
  • D. location design model

Answer: B

Explanation:
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf

 

NEW QUESTION 51
Which statement about creating a mobility group is true, excluding mobility anchors?

  • A. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
  • B. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
  • C. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
  • D. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.

Answer: D

Explanation:

 

NEW QUESTION 52
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

  • A. The edge of the cell should be below 35 RSSI.
  • B. One AP should be deployed per 3000 square feet.
  • C. The edge of the cell should be -67 dBm.
  • D. The measurement should be done on the 2.4-GHz band.

Answer: C

 

NEW QUESTION 53
An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise wireless network that currently leverages three wireless LAN controllers. Which architecture should the engineer deploy?

  • A. N+N solution without SSO
  • B. N+1 with SSO
  • C. N+N with SSO
  • D. N+1 solution without SS0

Answer: B

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Gu

 

NEW QUESTION 54
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?

  • A. -85 to -65 dBm
  • B. -72 to -67 dBm
  • C. -78 to -65 dBm
  • D. -85 to -67 dBm

Answer: D

Explanation:

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructure_3_4_0_UserGuide/bk_CiscoPrimeInfrastructure_3_4_0_UserGuide_chapter_01010.html minimum is -90 and maximum is -67 for IP phone

 

NEW QUESTION 55
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?

  • A. IP protocol 97
  • B. UDP port 97
  • C. UDP port 16666
  • D. TCP port 97

Answer: C

 

NEW QUESTION 56
When conducting a site survey for real-time traffic over wireless, which two design capabilities of smartphones and tablets must be considered? (Choose two.)

  • A. fewer antennas than laptops
  • B. lower data rates than laptops
  • C. no support for 802.11r
  • D. higher data rates than laptops
  • E. no support for 802.11ac

Answer: A,B

Explanation:

 

NEW QUESTION 57
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?

  • A. A redundant power supply is unavailable on the switch.
  • B. The switch is 802.3af capable.
  • C. The AP is getting power from a power injector.
  • D. The switch is PoE+ capable.

Answer: B

Explanation:

 

NEW QUESTION 58
A medium-sized hospitality company with 50 hotels needs to upgrade the existing WLAN in each hotel to 802.11n. During the site surveys for each hotel, what needs to be taken into consideration when determining the locations for each AP?

  • A. Selecting APs that can be hidden in ceiling panels to provide a secure and clean aesthetic look.
  • B. Selecting AP locations where power is already available.
  • C. Selecting locations that are easily accessed so maintenance and upgrades can be performed quickly.
  • D. Selecting locations that make visual assessment of the AP operation easy.

Answer: B

 

NEW QUESTION 59
During a post deployment site survey, issues are found with non-Wi-Fi interference. What should the engineer use to identify the source of the interference?

  • A. Cisco Spectrum Expert
  • B. Wireshark
  • C. network analysis module
  • D. wireless intrusion prevention

Answer: A

Explanation:
https://www.cisco.com/c/en/us/products/collateral/wireless/spectrum-expert/product_data_sheet0900aecd807033c3.html

 

NEW QUESTION 60
An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?

  • A. CCKM
  • B. OKC
  • C. SKC
  • D. 802.11r

Answer: A

 

NEW QUESTION 61
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?

  • A. A redundant power supply is unavailable on the switch.
  • B. The switch is PoE+ capable.
  • C. The switch is 802.3af capable.
  • D. The AP is getting power from a power injector.

Answer: B

Explanation:

 

NEW QUESTION 62
What causes the most signal attenuation, based on the wireless design tools?

  • A. glass wall
  • B. metal door
  • C. office window
  • D. cinder block wall

Answer: B

Explanation:

 

NEW QUESTION 63
......

Authentic Best resources for 300-425 Online Practice Exam: https://www.test4engine.com/300-425_exam-latest-braindumps.html

Updates Up to 365 days On Developing 300-425 Braindumps: https://drive.google.com/open?id=1erZxuEskMX4e1rAadCMBLTTmunr7sJm5